OEM Frigidaire Dryer 'M' Series Ignition Coil Kit [5303931775] | Ships Today | Fix.com
'M' Series Ignition Coil Kit – Part Number: 5303931775
'M' Series Ignition Coil Kit – Part Number: 5303931775 'M' Series Ignition Coil Kit – Part Number: 5303931775 https://fixcom.azureedge.net/Schematics/Frigidaire/DBHHKCTB.gif

'M' Series Ignition Coil Kit

Your Price
$26.44

Fix Number: FIX470049

Manufacturer #: 5303931775

Manufactured by: Frigidaire

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This coil ignition kit is used in dryers to open the gas valve when the dryer is on. This kit includes two coils. One is a two-wire secondary coil and the other is a three-wire booster coil. If your dryer does not heat or you notice heating inconsistencies, then the gas valve may be damaged and it is best to replace it to solve this problem. To repair, first release the two retaining clips that hold the top panel in place, then remove two screws that retain the front panel of the dryer cabinet. Next, pull the front panel forward and remember to disconnect the door switch. After accessing the gas coils, start removing the wires and unscrew the bracket that holds the coils. Remember to remove both the dual and main coil without removing the spacer. For more information on the kit and repair instructions, refer to diagram for a list of the parts.

Works with the following brands

Frigidaire, Kenmore, Gibson, Westinghouse, Kelvinator, Tappan, Electrolux, Crosley, General Electric, Hotpoint

Works with the following products

Dryer, Washer Dryer Combo

Fixes the following symptoms

No heat or not enough heat | Takes too long to dry

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 11 reviews
Customer:
Roger from Port Washington, WI
Parts Used:
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
Little/no heat
checked on line how to take dryer apart, more screws and wires than I thought. Once I took a screw out, I labeled it on a piece of paper where it came from. I also to pictures. I wanted to make sure I put it back together correctly. I wasn't sure which part was bad, but I narrowed it down to 2 parts and ordered them both since cost for both was under $50.00. Once I got the dryer back together it worked great! Happy wife, happy life :).
2 of 2 people found these instructions helpful

Were these instructions helpful?   

Customer:
Miguel from Hialeah, FL
Parts Used:
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Not heating, not drying
I opened the dryer with instructions from Youtube, and look for the parts that I thought had the problem: Flame sensor and Ignition Coil Kit. Put dryer back together and turned on, it works like a champ, :-) I requested a repairman from Sears and he told me to just buy a new one, because the part needed cost $459.00, but for some reason it made no sense to me, so I went to this site and put the model number of my dryer and the problem, and they suggested that I replace the flame sensor. Miguel
1 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
ALAN from HARTWELL, GA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Dryer not heating properly
everything removed easily, had to use ninety degree screw driver on flame sensor, bend tab a little to replace. did not solve my heating problem. trying to figure what to do next.
1 of 2 people found these instructions helpful

Were these instructions helpful?   

Customer:
ronald from sandpoint, ID
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dryer ran but no heat.
I reviewed the parts select video and there was a huge possibility that it was the coil kit. I gambled and ordered the parts. Worked great. While most dryers seem to have the coils in a place where you have to remove the drum, my frigidaire galaxy model has the coils right up front so i had to lift the top and remove the front. Put the new part on and back in business. Delivery of my part was with a few days and the price was competitive. I definitely will make sure that is site is my first go to for troubleshooting my appliance problems.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Jeanne from Huntington, NY
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Dryer did not heat.
I removed the front access panel and replaced the 'M' Series Ignition Coils. I then vacuumed the interior of dryer, reinstalled the top and front panels and 'voila,' the dryer works perfectly!
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
john from oakland gardens, NY
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
No Flame
Open the little service door at the bottom left.Shutt off the electricity [pull cord out] disconnect the 2 plug from the 2 coils and using a phillips screwdriver took off the screws holding the plate take out both coils ,install the 2 new ones and put back the plate with the screws and the 2 plugs and thats it. Dryer is back to working mode again.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
David from Santa Fe, NM
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Gas dryer was not heating. Diagnosed the actuator coil.
Diagnosed bad coil by wiggling terminal connection on coil. Intermittent flame. Ordered the coil kit and replaced both. Works great. This site had the parts at my house in 3days.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Frank from St. Joseph, MN
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Initial heat but them goes cold.
Instructions already available on this website. Diagnosis and instruction for repair were spot on. Piece of cake. Saved me the cost of a new dryer.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
gerald from new orleans, LA
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
No heat
changed coil kit burner came on a little red flame cleaned burner by blowing out with air compressor flame went to blue working now
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
Lynette from Waterloo, IA
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Tumbled but did not dry
Lifted top and removed the front swapped out the fuse looking elements put dryer back together
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Customer:
mark from Edmonds, WA
Parts Used:
  • 'M' Series Ignition Coil Kit
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Heat would almost stop after only a few minutes
Putty knife to remove top-phillips screwdriver to remove 2 screws in front to remove front and same driver to remove metal strap holding down both coils. I also replaced the cycle thermostat for good measure while i had the front removed. Works great and very high heatnow-were the coils failing for months? I suspect so.
0 of 1 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX470049
Manufacturer Part Number: 5303931775
Brand
Model Number
Description
Kenmore
417.79042900
Dryer - Kenmore Dryer Model 417.79042900 (41779042900, 417 79042900) Parts
Kenmore
417.88980100
Dryer - Kenmore Dryer Model 417.88980100 (41788980100, 417 88980100) Parts
Kenmore
417.99985840
Washer Dryer Combo - Kenmore Washer/Dryer Combo Model 417.99985840 (41799985840, 417 99985840) Parts
Kenmore
41759012890
Dryer - Kemore Dryer 41759012890
Frigidaire
41759022890
Dryer - Gas
Kenmore
41771712510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771712511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771722511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723510
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41771723511
Washer Dryer Combo - LAUNDRY CENTER
Kenmore
41774182300
Dryer
Kenmore
41774182301
Dryer
Kenmore
41779042990
Dryer
Kenmore
41779042991
Dryer
Kenmore
41779052990
Dryer
Kenmore
41779052991
Dryer
Kenmore
41788989100
Dryer
Kenmore
41788989800
Dryer
Kenmore
41790032990
Dryer
Kenmore
41790042990
Dryer
Kenmore
41790042991
Dryer
Kenmore
41790052990
Dryer
Kenmore
41790052991
Dryer
Kenmore
41790142000
Dryer
Kenmore
41790412700
Dryer
Kenmore
41790412701
Dryer
Kenmore
41790862990
Washer Dryer Combo
Kenmore
41790862991
Washer Dryer Combo
Kenmore
41790862992
Washer Dryer Combo