High Limit Thermostat 3204267
Works With Model 41788042700!
$85.77
In Stock
- Fix Number:
- FIX446428
- Manufacturer #:
- 3204267
- Manufactured by:
- Frigidaire
Works With Model 41788042700!
Jump to:
Product Description
This high limit thermostat has a limit of 260 degrees Fahrenheit. Meaning that it will cut out when the internal dryer temperature reaches 260. This thermostat cuts back in when the temperature drops by 70 degrees Fahrenheit.
-
Works with the following brands:Frigidaire, Kenmore, Electrolux, Gibson
-
Works with the following products:Dryer, Washer Dryer Combo
-
Fixes the following symptoms:Too hot, Not Heating
-
Part# 3204267 replaces these:AP2131477, 508516, 73204267
- Works with the following brands:
- Frigidaire, Kenmore, Electrolux, Gibson
- Works with the following products
- Dryer, Washer Dryer Combo
- Fixes the following symptoms
- Too hot, Not Heating
- Part# 3204267 replaces these:
- AP2131477, 508516, 73204267
Part Number Cross Reference
Videos For installing this part.
Replacing your High Limit Thermostat

Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- jason from CANTON, MS
- Parts Used:
- 3204267
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
dryer would turn off after 30 seconds
Disconnected dryer, from power, remove the back cover, replaced part, reassemble and tested
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
No Heat and error on front panel after about 2 minutes after running
removed 2 rear screws, removed top panel. Removed 2 top screws and 2 internal screws, disconnected electrical connections and removed front panel. removed drum guide. Disconnected drive belt, removed drum. removed 4 screws from rear, removed the heating element assembly. Cleaned the entire bottom section of the dryer. Installed new h
... Read more
eating element assembly, installed thermal limiter and control thermistor, reassembled the dryer. Dryer has been working great!
Read less
2 of 3 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dryer was not effectively drying clothes
I replaced the control thermistor and high limit thermistor. I followed the video and although it was a different model the dismantle and assembly instructions were very helpful. I did discover that the location for one of the sensor in the mechanical views provided was incorrect. I also discovered that the real problem was that the hot a
... Read more
ir venting was plugged and most likely the cause of the problem in the first place. I am not sure that this was listed as a cause of the problem but it was certainly where I should have started from.
Read less
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX446428
Manufacturer Part Number: 3204267
Manufacturer Part Number: 3204267
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.