Drum Support Roller

I decided to replace the Drum support wheels (2), Rear drum bearing, Belt tension wheel, Drum front felt gasket and Drum Belt. 1.) Remove the top plate which slides back about 1/2" then pull up easy. There are three plastic catches near front that could break if handled roughly. DO NOT remove electrical panel. 2.) remove electrical wire a ... Read more nd complete back panel, making note of what screw goes back into which hole. 3.) everything is open after that and could be figured out by anyone with a mechanical background. The drum slides out easy and is light to handle. CAUTION: when removing the Belt tension wheel, DO NOT reset Dbl Act Swt switch UNLESS belt broke. If your dryer does not rotate drum after re-assembling then you must push Drum Belt Tension Dbl Act Swt in other direction.