Part Location Diagram of WPW10121334 Whirlpool Washer, Thrust
See part 18 in the diagram
( Grid squares measure 1x1 inch )

Washer, Thrust WPW10121334

Rated by 2 customers 

?

Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$5.61
In Stock
Fix Number:
FIX11748620
Manufacturer #:
WPW10121334
Manufactured by:
Whirlpool

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.0 / 5.0, 2 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Michael from DUXBURY, MA
Parts Used:
W10837240, WPW10446781, WPW10121334, 661570, WP3389420, 279640
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Idler pulley snapped off
Completely took dryer apart. Found problem. Ordered part. (Should have over nighted parts. ). Put dryer back together. The part company had a great video on disassemble. Watched it backwards to reassemble Works great. Hope this is helpful.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Tucson, AZ
Parts Used:
WP500092, WP40111201, WP37001298, WP37001042, WP23748, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Noisy dryer from an obvious part(s) failure.
Removed eight ?" screws (8A X 3/8 Hex Washer Head Tapping) starting with two at bottom kick panel, then two at dryer door panel; disconnect electrical connectors to release door panel from dryer body; remove four screws from dryer opening bulkhead to expose drum and blower impeller; remove two screws securing top dryer panel to side panel s; reach inside right lower access to release dryer belt from idler wheel; lift top panel a little while pulling out bulky drum. Vacuum the heck out of the inside. Even better, do all this outside and take compressed air to the inside. Because this dryer was 19 years old, all three rollers (drum, idler wheel), guides (2), felts(2), and belt were replaced. The noise was caused by seized rollers but all rubber on rollers and belt was cracking, so best to change such old worn out parts. Don't forget to lube all shafts with oil (plumbers silicone best), then reassemble...js
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11748620
Manufacturer Part Number: WPW10121334
Brand
Model Number
Description
Kenmore
10687884100
Dryer
Kenmore
10687884300
Dryer
Kenmore
10687884600
Dryer
Kenmore
10697502820
Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore
11051730
Washer
Kenmore
11055594
Washer
Kenmore
1105807410
Dryer
Kenmore
1105808010
Dryer
Kenmore
1105808700
Dryer
Kenmore
1105808800
Dryer
Kenmore
1105808810
Dryer
Kenmore
1105808850
Dryer
Kenmore
1105808860
Dryer
Kenmore
1105817820
Dryer
Kenmore
1105817830
Dryer
Kenmore
1105818810
Dryer
Kenmore
1105818820
Dryer
Kenmore
1105907000
Dryer
Kenmore
1105907100
Dryer
Kenmore
1105907400
Dryer
Kenmore
1105907500
Dryer
Kenmore
1105907501
Dryer
Kenmore
1105907600
Dryer
Kenmore
1105907610
Dryer
Kenmore
1105907700
Dryer
Kenmore
1105907710
Dryer
Kenmore
1105907720
Dryer
Kenmore
1105907721
Dryer
Kenmore
1105907730
Dryer
Kenmore
1105907800
Dryer