Part Location Diagram of WPW10121334 Whirlpool Thrust
See part 18 in the diagram
( Grid squares measure 1x1 inch )

Thrust WPW10121334

Works With Model ADG30RGS111TW01!

Rated by 7 customers 

?

Easy 

1- 2 hours 

Ratings submitted by customers like you who bought this part.

?
$7.93
In Stock
Fix Number:
FIX11748620
Manufacturer #:
WPW10121334
Manufactured by:
Whirlpool
Works With Model ADG30RGS111TW01!

Product Description

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.8 / 5.0, 7 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Ralph from Alexandria, OH
Parts Used:
WPY54414, WPY055980, WP56076, WP40113601, WP40111201, WP37001144, WP37001132, WP23748, WPW10121334
Difficulty Level:
Really Easy
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Grinding , drum flopping , .....Noise !
I won't go into all the details of the repairs .....The videos this company provides are A+++.. Some would say I would have been better off purchasing a New dryer ...LOL if I had to use a appliance repair man for this job ...Probably ...but ...using this site certified parts , and using the easy to follow instruction videos ....It was tru ly a very easy repair . I spent more time getting everything perfectly clean inside the dryer housing ,and letting the high temp adhesive cure than I did actually installing the parts.I can't recommend this company or the parts more ...Just take your time with removal , cleaning , and installation ....Patience !Excellent ...parts quality , shipping speed , and video installation instructions !!!! My dryer now works and SOUNDS like a new dryer ....Thank you !
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Mount Clemens, MI
Parts Used:
WP27001007, WPW10121334
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set
Cloths still wet after cycle
Take the front panels off, there's 2 screws at the bottom of each panel. Unplug the wire harness from the back of the motor and remove the belt from the pulleys. Pay close attention to the way that the belt runs. It's a little difficult to put back on so you only want to do it once. Disconnect the water hoses from to pump. Put a towel und er it a little water will come out. Unbolt the motor and remove it. I replaced the idle pulley and the belt. The pump must be removed from the motor there are 3 torx screws. The idle pulley has to be removed with snap ring pliers. Replace the belt and reassemble. Again pay close attention how the belt goes on in relation to the pump screws. Put the motor back in the washer. Another set of hands would be helpful when bolting it back in, it's awkward and there's very little room. Put the belt back on the pulleys. It's tricky be patient. Hook the hoses back up and plug in the wire harness. I ran a load just to make sure nothing leaked before I put the front panels back on. Having done it once if I had to do it again it would go much easier.
3 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from DUXBURY, MA
Parts Used:
W10837240, WPW10446781, WPW10121334, 661570, WP3389420, 279640
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Idler pulley snapped off
Completely took dryer apart. Found problem. Ordered part. (Should have over nighted parts. ). Put dryer back together. The part company had a great video on disassemble. Watched it backwards to reassemble Works great. Hope this is helpful.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
dan from marion, IN
Parts Used:
WPY54414, WP40111201, WP37001144, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
bearing on belt tension pulley wore out.
took front two pieces off to gain access to pulley and bracket. took bracket off with 7/16 socket. installed new pulley and bracket. installed new belt over tub. put front back on except bottom panel. installed belt on to new pulley . replaced bottom panel.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Tucson, AZ
Parts Used:
WP500092, WP40111201, WP37001298, WP37001042, WP23748, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver
Noisy dryer from an obvious part(s) failure.
Removed eight ?" screws (8A X 3/8 Hex Washer Head Tapping) starting with two at bottom kick panel, then two at dryer door panel; disconnect electrical connectors to release door panel from dryer body; remove four screws from dryer opening bulkhead to expose drum and blower impeller; remove two screws securing top dryer panel to side panel s; reach inside right lower access to release dryer belt from idler wheel; lift top panel a little while pulling out bulky drum. Vacuum the heck out of the inside. Even better, do all this outside and take compressed air to the inside. Because this dryer was 19 years old, all three rollers (drum, idler wheel), guides (2), felts(2), and belt were replaced. The noise was caused by seized rollers but all rubber on rollers and belt was cracking, so best to change such old worn out parts. Don't forget to lube all shafts with oil (plumbers silicone best), then reassemble...js
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
reginald from mount holly, NJ
Parts Used:
WPY54414, WP40113601, WP40111201, WP37001298, WP37001144, WP37001042, WP500121, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
noisy when operating
followed instructions in vidios for belt and idler pulley and tub support rollers model in vidios different but came apart basicly the same way. dryer is 17 yrs old, glad to find parts runs quiet as new idler pulley and shaft not worn replaced anyway only belt and left hand tub support roller and shaft were worn
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jesus from philadelphia, PA
Parts Used:
500092, WP40111201, WP37001298, 12002090, WPW10121334
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
clothes where getting holes from getting caught on edge of the drum
I took the face off the dryer then removed the drum. Inspected the dryer for broken parts because I already knew the drum glide was damaged that's why my clothes where getting caught on the edge of the drum and getting damaged.I replaced all the parts that I found very easily on the site ,with the picture diagrams that come up to choose p arts you need is very simple to see what exact parts you need to replace on your appliances. And my dryer has been working ever since. Thanks
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX11748620
Manufacturer Part Number: WPW10121334
Brand Model Number Description
Kenmore 10687884100 Dryer
Kenmore 10687884300 Dryer
Kenmore 10687884600 Dryer
Kenmore 10697502820 Dryer - Kenmore Dryer Model 106.97502820 (10697502820, 106 97502820) Parts
Kenmore 11051730 Washer
Kenmore 11055594 Washer
Kenmore 1105807410 Dryer
Kenmore 1105808010 Dryer
Kenmore 1105808700 Dryer
Kenmore 1105808800 Dryer
Kenmore 1105808810 Dryer
Kenmore 1105808850 Dryer
Kenmore 1105808860 Dryer
Kenmore 1105817820 Dryer
Kenmore 1105817830 Dryer
Kenmore 1105818810 Dryer
Kenmore 1105818820 Dryer
Kenmore 1105907000 Dryer
Kenmore 1105907100 Dryer
Kenmore 1105907400 Dryer
Kenmore 1105907500 Dryer
Kenmore 1105907501 Dryer
Kenmore 1105907600 Dryer
Kenmore 1105907610 Dryer
Kenmore 1105907700 Dryer
Kenmore 1105907710 Dryer
Kenmore 1105907720 Dryer
Kenmore 1105907721 Dryer
Kenmore 1105907730 Dryer
Kenmore 1105907800 Dryer