OEM Amana Dryer Screw, 8/18 x 3/8 [WP90767] | Ships Today | Fix.com
Screw, 8/18 x 3/8 – Part Number: WP90767
Screw, 8/18 x 3/8 – Part Number: WP90767 Screw, 8/18 x 3/8 – Part Number: WP90767 Screw, 8/18 x 3/8 – Part Number: WP90767 https://fixcom.azureedge.net/Schematics/Maytag/7086.gif

Screw, 8/18 x 3/8

Your Price
$5.83

Fix Number: FIX11746840

Manufacturer #: WP90767

Manufactured by: Whirlpool

Get this part fast. Average delivery time via standard shipping: 1.8 days.

Part description

This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.

Works with the following brands

Amana, Kenmore, Whirlpool, Maytag, Jenn-Air, KitchenAid, Speed Queen, Norge, Magic Chef, Roper, Crosley, Admiral, Litton, Estate, Inglis, Menumaster, Caloric, Hoover, Hardwick, International, Dacor, Gaggenau, Frigidaire

Works with the following products

Dryer, Refrigerator, Washer, Air Conditioner, Microwave, Range, Wall Oven, Freezer, Dishwasher, Cooktop, Washer Dryer Combo, Furnace, Microwave Oven Combo, Trash Compactor, Ice Maker, Wine and Beverage Cooler, Dehumidifier, Heater, Range Hood, Vacuum, Laundry Accessories, Cooler

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 5.0 / 5.0, 1 reviews
Customer:
Jason from Hartfield, VA
Parts Used:
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Ice maker was leaking which resulted in a large block of ice instead of cubes
I removed the screws holding the ice maker to the side of the refrigerator. There were positions for three screws-- two on top and one on the bottom; mine was missing the bottom screw. I pulled the wiring harness free from the back of the fridge and removed the old icemaker. Once the old icemaker was removed from the fridge, I removed the wiring harness from it using a screwdriver to push in the tab holding it in place. I removed the steel ice catch bar that stops ice from being made when it is in the up position-- no tools needed for that. It was just held in by tension. I installed the old ice catch bar and the old wiring harness onto the new ice maker. Then I attached the wiring harness to the back of the fridge, lined the water tube in place with the icemaker and replaced the screws to hold the new icemaker to the fridge. Ice maker now works perfectly.
0 of 6 people found these instructions helpful

Were these instructions helpful?   

Model Cross Reference

This part works with the following models:

Fix Number: FIX11746840
Manufacturer Part Number: WP90767
Brand
Model Number
Description
Amana
10-2NM
Air Conditioner - PORTABLE & COMPACT SERIES ROOM AIR CONDITIONER
Amana
10-2NM P54974-2R
Air Conditioner - Amana Air Conditioner Model 10-2NM P54974-2R (102NMP549742R, 10 2NM P54974 2R) Parts
Amana
10-2NMP54974-2R
Air Conditioner - Amana Air Conditioner Model 10-2NMP54974-2R (102NMP549742R, 10 2NMP54974 2R) Parts
Amana
100A-20
Air Conditioner - Room
Amana
100A-2M
Air Conditioner - Room
Amana
100A-2N
Air Conditioner - Room
Amana
100A-30
Air Conditioner - Room
Amana
100A-30H
Air Conditioner - Room
Amana
100A-356
Air Conditioner - Room
Amana
100A-3A
Air Conditioner
Amana
100A-3HN
Air Conditioner - Room
Amana
100A-3M
Air Conditioner - Room
Amana
100A-3N
Air Conditioner - Room
Amana
100A-3P
Air Conditioner - Room
Amana
100A-3PH
Air Conditioner - Room
Amana
100A-3R
Air Conditioner - Room
Amana
100A-3RH
Air Conditioner - Room
Amana
100A-556
Air Conditioner - Room
Amana
100A-8R
Air Conditioner - Room
Amana
100B-3A
Air Conditioner
Amana
100C-2N
Air Conditioner - Room
Amana
100C-2N1
Air Conditioner - Room
Amana
100C-2P
Air Conditioner - Room
Amana
100C-2PH
Air Conditioner - Room
Amana
100C-3N
Air Conditioner - Room
Amana
100C-3N1
Air Conditioner - Room
Amana
100C-3P
Air Conditioner - Room
Amana
100C-3PH
Air Conditioner - Room
Amana
100C-8P
Air Conditioner - Room
Amana
100D-356
Air Conditioner - Room