Amana Dryer Screw, 8/18 x 3/8 WP90767 | Fix.com

Screw, 8/18 x 3/8

&SeePartX&
11746840-1-S-Whirlpool-WP90767-Screw, 8/18 x 3/8
11746840-2-S-Whirlpool-WP90767-Screw, 8/18 x 3/8
11746840-3-S-Whirlpool-WP90767-Screw, 8/18 x 3/8
https://www.fix.com/Schematics/Maytag/7086.gif
Click for the BBB Business Review of this Appliances - Small - Supplies & Parts in Dartmouth NS
Part Description:
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the manufacturer for further repair guidance.
This part works with the following brands:
Part number cross reference:
This part works with the following products:
Dryer, Refrigerator, Washer, Microwave, Wall Oven, Air Conditioner, Washer Dryer Combo, Range, Dishwasher, Freezer, Cooktop, Microwave Oven Combo, Ice Maker, Trash Compactor, Wine and Beverage Cooler, Range Hood, Dehumidifier, Laundry Accessories, Smoker.

Installation Instructions

Showing 1-1 of 1 Instructions

Ice maker was leaking which resulted in a large block of ice instead of cubes

I removed the screws holding the ice maker to the side of the refrigerator. There were positions for three screws-- two on top and one on the bottom; mine was missing the bottom screw. I pulled the wiring harness free from the back of the fridge and removed the old icemaker. Once the old icemaker was removed from the fridge, I removed the wiring harness from it using a screwdriver to push in the tab holding it in place. I removed the steel ice catch bar that stops ice from being made when it is in the up position-- no tools needed for that. It was just held in by tension. I installed the old ice catch bar and the old wiring harness onto the new ice maker. Then I attached the wiring harness to the back of the fridge, lined the water tube in place with the icemaker and replaced the screws to hold the new icemaker to the fridge. Ice maker now works perfectly.

Were these instructions helpful?

0 of 1 people found these instructions helpful
Parts Used: Replacement Ice Maker , Screw, 8/18 x 3/8
Difficulty Level: Really Easy
Total Repair Time: Less than 15 mins
Tools: Nutdriver, Screw drivers
Customer: Jason from Hartfield, VA
Showing 1-1 of 1 Instructions

Model Cross Reference List

This part works with the following models:

Fix Number: FIX11746840
Manufacturer Part Number: WP90767


Brand Model Number Description
Amana10-2NMAir Conditioner - Room
Amana100A-20Air Conditioner - Room
Amana100A-2MAir Conditioner - Room
Amana100A-2NAir Conditioner - Room
Amana100A-30Air Conditioner - Room
Amana100A-30HAir Conditioner - Room
Amana100A-356Air Conditioner - Room
Amana100A-3AAir Conditioner
Amana100A-3HNAir Conditioner - Room
Amana100A-3MAir Conditioner - Room
Amana100A-3NAir Conditioner - Room
Amana100A-3PAir Conditioner - Room
Amana100A-3PHAir Conditioner - Room
Amana100A-3RAir Conditioner - Room
Amana100A-3RHAir Conditioner - Room
Amana100A-556Air Conditioner - Room
Amana100A-8RAir Conditioner - Room
Amana100B-3AAir Conditioner
Amana100C-2NAir Conditioner - Room
Amana100C-2N1Air Conditioner - Room
Amana100C-2PAir Conditioner - Room
Amana100C-2PHAir Conditioner - Room
Amana100C-3NAir Conditioner - Room
Amana100C-3N1Air Conditioner - Room
Amana100C-3PAir Conditioner - Room
Amana100C-3PHAir Conditioner - Room
Amana100C-8PAir Conditioner - Room
Amana100D-356Air Conditioner - Room
Amana100D-556Air Conditioner - Room
Amana100LA-20Air Conditioner - Room