Rack Track Stop
-
Product Description
This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.
-
Works with the following brandsWhirlpool, Kenmore, KitchenAid, Maytag
-
Works with the following productsDishwasher
-
Fixes the following symptomsDoor latch failure, Not cleaning dishes properly, Door won’t close
-
Part Number Cross ReferencePart# WP8565925 replaces these:AP6013365, 8270105, 8524581, 8524582, 8565920, 8565925, W10082860, WP8565925VP
Product Description
This is a single rack track stop clip used to prevent the upper dish rack from sliding all the way out of the dishwasher. It is made of gray plastic and can wear with time. This is an easy repair that should not take very long to complete. Start by opening the dishwasher door, depress the tabs to remove both the front stop clips and remove the upper dish rack from the appliance. Now, using your small flat head screwdriver, release the retaining tab to remove the rear stop track that you are replacing, and pull the clip up to remove it. Install the new clip by inserting it into the support rail from the top and press it down to secure it in place.
-
Works with the following brands:Whirlpool, Kenmore, KitchenAid, Maytag
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Door latch failure, Not cleaning dishes properly, Door won’t close
-
Part# WP8565925 replaces these:AP6013365, 8270105, 8524581, 8524582, 8565920, 8565925 ... Show more , W10082860, WP8565925VP Show less
Videos For installing this part.
Replacing your Rack Track Stop

Questions and Answers
Be the first to ask our experts a question about this part!
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
-
Customer:Richard from Austin, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:
-
Customer:David from Alpine, CA
-
Difficulty Level:Really Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers, Wrench (Adjustable)
-
Customer:George from Croton on Hudson, NY
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:1- 2 hours
-
Tools:Pliers, Screw drivers
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
- < Prev
- 1
- Next >
Manufacturer Part Number: WP8565925