Rubber Washer

1)Turned power off to dishwasher 2) removed toekick cover 3) shut off water 4) disconnected water line to dishwasher 5) removed top screws holding DW in place 6) slid DW out of cavity to access the read bottom 7) removed terminal clips from bottom side of heating element under DW 8) remover special "nuts" that held the heat element in pla ... Read more ce under DW 9) removed old heat element from inside DW 10) installed rubber wagers on. New heat element 11) installed new heat element from inside DW through holes in back of DW 12) screwed "nuts" back onto the new heat element under DW .... Note .... The new element used different "nuts" than the original .... So I was glad I had ordered new "nuts" just in case and would suggest you do the same 13) attach the electrical connections back on the new heating element 14) slide the DW back under the counter and attach to counter top nosing 15) hooked the water back up and turned it on 16) turned the breaker back on