Maytag/Maytag_Thumb/50442.gif
See part 10 in the diagram
Replacing your Maytag Dishwasher Door Switches and Holder Assembly play video
( Grid squares measure 1x1 inch )

Door Switches and Holder Assembly

$ 44.33   In Stock
Fix Number: FIX2099645
Manufacturer #: 99002254
Manufactured by: Whirlpool

Product Description

This part senses when the door is closed so the cycle can start.

Videos For installing this part.

Replacing your Door Switches and Holder Assembly

Replacing your Door Switches and Holder Assembly play video

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.9 / 5.0, 4 reviews.
    Sort by:
    Sorry, we couldn't find any existing installation instruction that matched.
    • Customer:
      WILLIAM from SHEPHERDSVILLE, KY
    • Parts Used:
      99002254
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Pliers, Screw drivers
    Dishwasher stops during wash cycle - push in on door latch and it resumes
    I followed the installation video. First turned off the circuit breaker. Removed the door panel, black shield, and wires. Separated the latch handle from the holder assembly. Inserted the latch handle into the new holder assembly. Put the new switches in the holder assembly, reconnected the wires, snapped on the black shield, and screwed the door panel back on. Turned on the breaker. The dishwasher would not start, and I could hear the switches clicking when I pushed on the door. So I repeated the whole process making sure I had the handle and holder assembly fully seated and lined up with the screw holes. That did the trick. I've run 3 loads since, and the dishwasher completed the wash cycle every time. This site is the best!
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Connie from Oakland, CA
    • Parts Used:
      99002254
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Nutdriver, Screw drivers
    Dishwasher would not start
    Followed the video provided by this site. Since we discovered this was a 1995 Model we weren't sure fix would work, but thought it was worth a try....and it worked!!! Dishwasher started right up. Thank You!!!!!
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      Patrick from Cabin John, MD
    • Parts Used:
      99002254, 910223
    • Difficulty Level:
      Really Easy
    • Total Repair Time:
      Less than 15 mins
    • Tools:
    Dishwasher would not stay running; pushing on door would actuate power.
    No go without a torx driver. There are 8 screws to remove and 7 are torx. A power driver makes the job much faster. Remove the plastic door liner without disconnecting the wiring. 7 screws. Remove the Philips screw that holds the switch housing. Set your drill on the inside of the door otherwise the door spring tension will slam the door shut on you. If you only ordered the switch itself, be very careful not to break off the switch retaining clip from the switch housing. It is easy to break. Pull the leads off of the switch, put them on the new switch, and push it back in to the housing. Remount the housing and re-screw, being careful to put it on the correct (indented) side. Lay the panel back in and re-screw it.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
    • Customer:
      James from Teaneck, NJ
    • Parts Used:
      99002254
    • Difficulty Level:
      Easy
    • Total Repair Time:
      30 - 60 mins
    • Tools:
      Screw drivers
    Dishwasher door switch
    I followed your video which was very detailed and easy. However, I broke a part of the switch when trying to put it back in the door. Fortunately I was able to clean the corrosion off of one of the old switches to replace the new switch. The lock works perfectly. Thank you.
    0 of 1 people found this instruction helpful.
    Was this instruction helpful to you?
    Thank you for voting!
      Model Compatibility
      This part works with the following models:
      Fix Number: FIX2099645
      Manufacturer Part Number: 99002254
      Brand
      Model Number
      Description
      Crosley
      CDC400B
      Dishwasher
      Crosley
      CDC450B
      Dishwasher
      Crosley
      CDC5J
      Dishwasher
      Crosley
      CDU20J
      Dishwasher
      Crosley
      CDU250B
      Dishwasher
      Crosley
      CDU250V
      Dishwasher
      Crosley
      CDU2J
      Dishwasher
      Crosley
      CDU2J3
      Dishwasher
      Crosley
      CDU400B
      Dishwasher - Undercounter
      Crosley
      CDU450B
      Dishwasher
      Crosley
      CDU5J
      Dishwasher
      Crosley
      CDU5JV
      Dishwasher
      Crosley
      CDU600B
      Dishwasher
      Crosley
      CDU600V
      Dishwasher
      Crosley
      CDU8000B
      Dishwasher
      Crosley
      CDU8000V
      Dishwasher
      Crosley
      CDU8J
      Dishwasher
      Magic Chef
      DC4000B
      Dishwasher
      Magic Chef
      DC4500B
      Dishwasher
      Magic Chef
      DC5J
      Dishwasher
      Magic Chef
      DU2000B
      Dishwasher
      Magic Chef
      DU2000B-C
      Dishwasher
      Magic Chef
      DU2000V
      Dishwasher
      Magic Chef
      DU2000V-C
      Dishwasher
      Magic Chef
      DU2000W
      Dishwasher
      Magic Chef
      DU20J
      Dishwasher
      Magic Chef
      DU20J-CAN
      Dishwasher
      Magic Chef
      DU20JV
      Dishwasher
      Magic Chef
      DU2100B
      Dishwasher
      Magic Chef
      DU2500B
      Dishwasher