Hinge Pin

Found new parts numbers by looking at diagram on your website. Received parts in 2-3 days. Unscrewed broken lid holder from the top of the washer and screwed in the new one in place and then inserted new lid with pins. It was simple and works great.

Shut the power off, at the breaker, in electrical box. Removed six torx screws holding the inner panel on the dishwasher door. Put my wife's 1.5 ltr bottle of wine on door , so the door would stay open, stood inner panel , on back of. That door. Recorded were wires were attached on the wax motor, pulled off wire connections! Used screw ... Read more driver to pry plastic arms a little at a time, off of old wax motor, put new wax motor in place. Replaced wire connections, dropped inner door on outter door, held door tight, put six screws back in, ran dishwasher runs great detergent door opens now!!! Did not install other parts yet, just cleaned door and cup ,works great!!!!