See part M120 in the diagram
( Grid squares measure 1x1 inch )
Case Assembly
$35.42
In Stock
Fix Number: FIX3530721
Manufacturer #: ABQ32598101
Manufactured by:
LG
-
Works with the following brandsLG
-
Works with the following productsDishwasher
-
Part Number Cross ReferencePart# ABQ32598101 replaces these:AP4439847
Product Description
-
Works with the following brands:LG
-
Works with the following products:Dishwasher
-
Part# ABQ32598101 replaces these:AP4439847
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Edward from Eden Priairie, MN
-
Difficulty Level:Very Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
The pump case assembly cracked and was not circulating enough water
Very easy - Just remove the baskets, pull up the lower spray arm to remove it and the remove the upper spray arm by removing the retaining screw and twist the assembly to the left and remove it. Next remove all the screws that hold down the mesh cover, note the arrow at the front for re-installation. Then remove the two screws for the center spray arm and remove it. Remove the screen mesh and you will see the case sitting below which you can now remove and replace. Make sure you put the new gasket on the lower case assembly and then go ahead and re- install the parts.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX3530721
Manufacturer Part Number: ABQ32598101
Manufacturer Part Number: ABQ32598101
Brand
Model Number
Description