11750072-1-M-Whirlpool-WPW10195623-Drawer Track

( Grid squares measure 1x1 inch )

11750072-1-S-Whirlpool-WPW10195623-Drawer Track

11750072-2-S-Whirlpool-WPW10195623-Drawer Track

11750072-1-S-Whirlpool-WPW10195623-Drawer Track 360 view

Replacing your KitchenAid Dishwasher Drawer Track

Drawer Track WPW10195623

Rated by 1 customers

A Bit Difficult

15 - 30 mins

Ratings submitted by customers like you who bought this part.

$49.53

Fix Number:: FIX11750072
Manufacturer #:: WPW10195623
Manufactured by:: Whirlpool

Jump to:

Product Description
Part Videos
Questions and Answers
Related Parts
Installation Instructions
Model Compatibility

Product Description

This is an authentic OEM replacement drawer track for the upper rack of your dishwasher. Also known as a rack slider bar, it helps to support the top rack and allows it to glide in and out of your dishwasher easily. If it has become warped or damaged, it should be replaced as it may prevent your dishrack from operating properly. This part is sold individually, and is interchangeable for the left and right side of the dishwasher. If you need replacement wheels or rack stop clips, those parts can be purchased separately. Replacing this part is an easy repair, and will require a flat blade screwdriver to pop open the rear stop clip. The entire top rack assembly is removed from the dishwasher, the damaged track is replaced with the new one, and then the rear stop clip is reattached and the rack put back in.

Works with the following brands:

KitchenAid, Kenmore, Whirlpool, Maytag
Works with the following products:
Dishwasher
Fixes the following symptoms:

Door won’t close, Door latch failure
Part# WPW10195623 replaces these:

AP6016779, W10195623, W10324563, W10331879

Works with the following brands:: KitchenAid, Kenmore, Whirlpool, Maytag
Works with the following products: Dishwasher
Fixes the following symptoms: Door won’t close, Door latch failure
Part# WPW10195623 replaces these:: AP6016779, W10195623, W10324563, W10331879

Videos For installing this part.

Replacing your Drawer Track

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

1 question answered by our experts.

< Prev
1
Next >

Sort by:

Cayce

December 26, 2022

The top track rollers have, since new, not been close enough together to hold the slide bar in place. The bar could be too narrow. Terrible design. I’m always having to pop it back in place. It does not come off the back or front, right in the middle of the bar, it pops out from the wheels. Garbage!

For model number KUDC10FXSS5

Hello Cayce, thank you for the question. This could be an indication the Drawer Track, Fix Number: FIX11750072 is worn and may need to be replaced. We hope this helps, good luck with this repair!

Was this helpful?