11747779-1-M-Whirlpool-WP99003605-Inlet/Outlet Bezel
Whirlpool/Whirlpool_Thumb/CVIFWDNJ.gif
See part 3 in the diagram
( Grid squares measure 1x1 inch )

Inlet/Outlet Bezel

Rated by 3 customers 

?

Really Easy 

30 - 60 mins 

Ratings submitted by customers like you who bought this part.

?
$21.16
In Stock
Fix Number: FIX11747779
Manufacturer #: WP99003605
Manufactured by: Whirlpool
  • Product Description

    This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.

  • Works with the following brands
    KitchenAid, Kenmore, Whirlpool, Maytag
  • Works with the following products
    Dishwasher
  • Fixes the following symptoms
    Leaking, Not cleaning dishes properly
  • Part Number Cross Reference
    Part# WP99003605 replaces these:
    AP6014539, 6-919693, 99003605
Questions and Answers Questions and Answers
3 Installation Instructions
Model Compatibility
Product Description Questions and Answers Installation Instructions Model Compatibility

Product Description

This is an inlet/outlet bezel, also known as the air duct bezel, is for your dishwasher. It covers the vent openings in the dishwasher and prevents the dishwasher from leaking. It is gray in color and is approximately 4 inches in diameter. If the bezel is damaged, or the tabs holding in place are broken, you may need to replace it. Many of our customers have described this repair as easy. This is an authentic OEM part sourced directly from the manufacturer.

  • Works with the following brands:
    KitchenAid, Kenmore, Whirlpool, Maytag
  • Works with the following products:
    Dishwasher
  • Fixes the following symptoms:
    Leaking, Not cleaning dishes properly
  • Part# WP99003605 replaces these:
    AP6014539, 6-919693, 99003605
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 3.8 / 5.0, 3 reviews.
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    Jeff from Santa BArbara, CA
  • Parts Used:
    WP99003605
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
The old Bezel broke off from the receiving bracket, inside of the tub.
Place new part,so it is flush with the inside wall over the receiving bracket it was located.Looking down at the part,apply pressure/push, while turning it clockwise,until it stops/locks on .Wah-La...you're done!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    adam from black mountain, NC
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
Leaking during cycle from front
Note: this is a 2 drawer dishwasher. The front bezels/vents broke at the tab which locks in the module and compresses the seal. Remove the front panel starting with 2 screws on the bottom front. Pull front panel down to unlock and pull away. The next set of screws are fairly obvious, remove that layer of shielding. Not you can see the turbine looking vent module. There is one screw attaching it to the drawer, remove it, and disconnect 2 wires at the top. Now that module can be pulled away. Clean the sealing surface on the drawer and the module. Clean or replace the seal. Inspect the locking grooves to insure they are clear, the bezel tabs break off in those grooves. Reinstall module and lock in place with new bezel, move it around a bit to insure good seal. Reassemble in reverse. Note: there are 2 vents per drawer 4 total on machine, I would replace all 4 as they will most likely soon fail for the same reason.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Richard from San Antonio, TX
  • Parts Used:
    WP99003605
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Filter cover on inside front wall broken
Removed 2 small broken pieces that remained ( using Hemostat). Inserted new filter cover which screws in clockwise.... Very simple.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
Model Compatibility
This part works with the following models:
Fix Number: FIX11747779
Manufacturer Part Number: WP99003605
Brand
Model Number
Description
Kenmore
46513322600
Dishwasher
Kenmore
46513323600
Dishwasher
Kenmore
46513329600
Dishwasher
Kenmore
46513333600
Dishwasher
Kenmore
46513339600
Dishwasher
Kenmore
46513342600
Dishwasher
Kenmore
46513343600
Dishwasher
Kenmore
46513349600
Dishwasher
Kenmore
665133225
Dishwasher
Kenmore
66513322K605
Dishwasher
Kenmore
665133235
Dishwasher
Kenmore
66513323K605
Dishwasher
Kenmore
665133295
Dishwasher
Kenmore
66513329K605
Dishwasher
Kenmore
665133335
Dishwasher
Kenmore
66513333K605
Dishwasher
Kenmore
665133395
Dishwasher
Kenmore
66513339K605
Dishwasher
Kenmore
665133425
Dishwasher
Kenmore
665133426
Dishwasher
Kenmore
66513342K605
Dishwasher
Kenmore
66513342K606
Dishwasher
Kenmore
665133435
Dishwasher
Kenmore
665133436
Dishwasher
Kenmore
66513343K605
Dishwasher
Kenmore
66513343K606
Dishwasher
Kenmore
665133495
Dishwasher
Kenmore
665133496
Dishwasher
Kenmore
66513349K605
Dishwasher
Kenmore
66513349K606
Dishwasher
Back to Top