AP6018324, 3370321, 3378107, 3378117, 3378120, 8275398
...
Show more, W10217171, W10217197, W10273573, W10273574, WPW10273573 Show less
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Konrad
November 15, 2021
Hi, I'm looking for a WT1485CW Drain and fill full assembly for this washing machine. Will this article fit? If not, do you have one that fits?
For model number LG WT1485CW
Hello Konrad, thank you for writing. No, the part you had chosen is not compatible with your model LG WT1485CW. Using you model we found two parts for Inlet hoses and two parts for Outlet hoses. Inlet hoses are FIX3527262 and FIX7795572. The Outlet hoses are FIX3617213 and FIX8749199. Good luck with your repair.
Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 3.9 / 5.0, 1 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
fill and drain assembly would pop off of faucet when water was applied
Remove cabinet screws and remove cabinet to expose plastic hose clamp located at the top of the cabinet. pry clamp cover loose and remove hoses. turn dishwasher on its side and disconnect both supply hose and drain hose from valve and pump fitting from bottom. Save the metal hose clamp. Pull hoses through the top holes. Feed new hoses dow
... Read moren through top holes. reconnect the supply hose bib to the valve and the drain hose to the pump. tighten both the bib and the hose clamp until secure.Turn dishwasher back upright.Slide hoses back into the plastic hose clamp at the top of the cabinet and replace all cabinet screws.
Read less
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11751626
Manufacturer Part Number: WPW10273574
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
