Wash Arm Bearing Ring
$24.50
In Stock
Fix Number: FIX11747064
Manufacturer #: WP9742946
Manufactured by:
Whirlpool
-
Product Description
This authentic OEM part is a wash arm bearing ring for your dishwasher. The bearing ring works in conjunction with the bearing nut to hold the lower spray arm in place. A sign you may need to replace the bearing ring is if the lower spray arm is wobbly when spinning. Over time the bearing ring can become cracked, chipped, or warped and will need to be replaced. No tools are required for this repair, simply remove the lower rack from the dishwasher and then unscrew the bearing nut. Remove the damaged bearing ring and drop the new one in place. The bearing nut can be twisted back in, and the dishrack put back in place.
-
Works with the following brandsKenmore, Whirlpool, KitchenAid, Estate
-
Works with the following productsDishwasher
-
Fixes the following symptomsNot cleaning dishes properly, Leaking, Noisy, Not draining
-
Part Number Cross ReferencePart# WP9742946 replaces these:AP6013837, 9742946
Product Description
This authentic OEM part is a wash arm bearing ring for your dishwasher. The bearing ring works in conjunction with the bearing nut to hold the lower spray arm in place. A sign you may need to replace the bearing ring is if the lower spray arm is wobbly when spinning. Over time the bearing ring can become cracked, chipped, or warped and will need to be replaced. No tools are required for this repair, simply remove the lower rack from the dishwasher and then unscrew the bearing nut. Remove the damaged bearing ring and drop the new one in place. The bearing nut can be twisted back in, and the dishrack put back in place.
-
Works with the following brands:Kenmore, Whirlpool, KitchenAid, Estate
-
Works with the following products:Dishwasher
-
Fixes the following symptoms:Not cleaning dishes properly, Leaking, Noisy, Not draining
-
Part# WP9742946 replaces these:AP6013837, 9742946
Videos For installing this part.
Replacing your Wash Arm Bearing Ring
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Joyce
December 31, 2021
There are two bearing rings, and the top one with the shoulder is the one I need.
For model number KUDM24SEAL2
Hello Joyce, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Fix Number: FIX11747064. We hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Related PartsAdditional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- 2
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Glenn from GLENDALE, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
Lower sprayer arm was excessively loose and would sometimes tip so high that it would not allow the lower basket to be pulled forward..
Remove lower basket completely. Loosen plastic butterfly nut, (in my case only needed to use my hand) Remove spray arm, remove old seal, replace spray arm, put the bearing ring in place, install butterfly nut and tighten, (firm hand tight) DONE
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Kay from BREMEN, IN
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
Dishwasher was Leaking
Removed the retainer nut which was broken and replaced the arm bearing ring and arm retainer nut. Works like new!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Lewis from SCOTTSDALE, AZ
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
Lower Spray Arm Bearing Ring Worn
Unscrew plastic retaining bolt, lift off spray arm, pay attention to the order that parts come off. Replace the Bearing Ring, reinstall the rest of the spray arm assembly. Reinstall the retaining bolt - hand tight. DONE
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Joseph from Monroe, WA
-
Difficulty Level:Easy
-
Total Repair Time:30 - 60 mins
-
Tools:Nutdriver, Screw drivers
Leaking from bottom of the door.
I originally thought the bottom door seal was leaking. Replaced seal, still leaked. Replaced wash arm bearing ring and spray arm seal. Still leaked. Further inspection of top of the pump assembly, there were 2 screws very loose which allowed the ribbon gasket to leak which directed the water to spray forcefully under the door seal. Tightened the two screws after reseating the gasket. Problem solved. Success has struck! Always a good day!
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Mary from Greenwood, MS
-
Parts Used:WP9742946
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:
The ring had broken.
I simply placed the ring in position and screwed the arm down.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Robert from Weiser, ID
-
Difficulty Level:Really Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Nutdriver
The plastic screw that help the lower washer arm on broke off.
It was pretty simple, I should have taken it apart before I ordered the parts. I followed the parts diagram and ended up ordering more than I really needed. I guess its better to have more parts then not having what you need.
Was this instruction helpful to you?
Thank you for voting!
-
Customer:Mickey from Seminole, OK
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers
The wash arm bearing ring was missing the plastic lip around the top of the bearing
Repair was extremely easy. First you need to remove the bottom dish rack by pulling it all the way out of the dishwasher in order to get to the wash arm. Remove the plastic screw holding down the wash arm, this can be done with pliers. Generally you can remove the screw without the pliers but some may be tighter than others. Remove the wash arm and take out the spray arm seal and replace with the new one. Pay close attention to how the seal comes out to make sure you put the new one in correctly. Replace the wash arm unto the seal. Put the wash arm bearing ring into the center of the wash arm. The upper lip of the bearing ring will rest on top of the wash arm. Then replace the screw hand hand tighten. Be careful not to over tighten. The final step is to put the bottom dish rack back into the dishwasher. It's just that easy.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- 2
- Next >
★
Customer Reviews
Filter By Rating:
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
Kay S - December 22, 2020
Verified Purchase
Wash Arm Bearing Ring
This was a very easy repair!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11747064
Manufacturer Part Number: WP9742946
Manufacturer Part Number: WP9742946
Brand
Model Number
Description