OEM Kenmore Dishwasher Seal, Lower Sprayarm [WP3376846] | Ships Today | Fix.com
Seal, Lower Sprayarm – Part Number: WP3376846
Seal, Lower Sprayarm – Part Number: WP3376846 Seal, Lower Sprayarm – Part Number: WP3376846 https://fixcom.azureedge.net/Schematics/Maytag/UHLYYAGP.gif

Seal, Lower Sprayarm

Your Price
$7.60

Fix Number: FIX11741334

Manufacturer #: WP3376846

Manufactured by: Whirlpool

Part description

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

Works with the following brands

Kenmore, Whirlpool, KitchenAid, Estate, Inglis, Maytag, Crosley, Roper

Works with the following products

Dishwasher

Fixes the following symptoms

Not cleaning dishes properly | Leaking | Noisy | Not draining

Videos For installing this part.

Installation InstructionsProvided by FIX customers like you

Average Repair Rating: 4.9 / 5.0, 15 reviews ?
Sort by:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Glenn from GLENDALE, AZ
Parts Used:
WP9742946, WP3376846
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Lower sprayer arm was excessively loose and would sometimes tip so high that it would not allow the lower basket to be pulled forward..
Remove lower basket completely. Loosen plastic butterfly nut, (in my case only needed to use my hand) Remove spray arm, remove old seal, replace spray arm, put the bearing ring in place, install butterfly nut and tighten, (firm hand tight) DONE
3 of 3 people found this instruction helpful.
Were these instructions helpful?
Customer:
steven from onalaska, WI
Parts Used:
WP8268873, WP3376846
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
sprayer nut broke
put needlenose inside left over piece and backed it out
2 of 2 people found this instruction helpful.
Were these instructions helpful?
Customer:
Lewis from SCOTTSDALE, AZ
Parts Used:
WP9742946, WP3376846
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
Lower Spray Arm Bearing Ring Worn
Unscrew plastic retaining bolt, lift off spray arm, pay attention to the order that parts come off. Replace the Bearing Ring, reinstall the rest of the spray arm assembly. Reinstall the retaining bolt - hand tight. DONE
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Joseph from Monroe, WA
Parts Used:
WP8539324, WP9742946, 4172127, WP3376846
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Leaking from bottom of the door.
I originally thought the bottom door seal was leaking. Replaced seal, still leaked. Replaced wash arm bearing ring and spray arm seal. Still leaked. Further inspection of top of the pump assembly, there were 2 screws very loose which allowed the ribbon gasket to leak which directed the water to spray forcefully under the door seal. Tightened the two screws after reseating the gasket. Problem solved. Success has struck! Always a good day!
1 person found this instruction helpful.
Were these instructions helpful?
Customer:
Robert from Weiser, ID
Parts Used:
WP9742946, WP8268873, WP3376846, 8194582, 717000
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
The plastic screw that help the lower washer arm on broke off.
It was pretty simple, I should have taken it apart before I ordered the parts. I followed the parts diagram and ended up ordering more than I really needed. I guess its better to have more parts then not having what you need.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Mickey from Seminole, OK
Parts Used:
WP9742946, WP3376846
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers
The wash arm bearing ring was missing the plastic lip around the top of the bearing
Repair was extremely easy. First you need to remove the bottom dish rack by pulling it all the way out of the dishwasher in order to get to the wash arm. Remove the plastic screw holding down the wash arm, this can be done with pliers. Generally you can remove the screw without the pliers but some may be tighter than others. Remove the wash arm and take out the spray arm seal and replace with the new one. Pay close attention to how the seal comes out to make sure you put the new one in correctly. Replace the wash arm unto the seal. Put the wash arm bearing ring into the center of the wash arm. The upper lip of the bearing ring will rest on top of the wash arm. Then replace the screw hand hand tighten. Be careful not to over tighten. The final step is to put the bottom dish rack back into the dishwasher. It's just that easy.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
ronald from seattle, WA
Parts Used:
WP9742946, WP9742945, WP3376846
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Broken retainer nut
Watched the video, when parts arrived made a quick and easy install.
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
Leonard from Whittier, CA
Parts Used:
WP9742946, WP3376846
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Washers old and broken
Ordered new parts an inserted by taking off the fly wheel
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
sean from Kimball, MI
Parts Used:
WP9742946, WP3376846
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Noisy Operation
Nscrewed the wingnut retainer on wash arm and installed new ring and seal , reinstalled wash arm and nut .
0 of 1 people found this instruction helpful.
Were these instructions helpful?
Customer:
b j from Allen, TX
Parts Used:
WP9742946, WP9742945, WP3376846
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Wash arm retainer nut broke causing other parts to break
Ordered parts from the website on-line after going to 4 different appliance parts stores locally....none had the parts in stock and would be 2 or 3 days till delivered. Ordered on-line from the website and had them by noon the next day....repair accomplished by placing one seal below the wash arm and the other above, then inserting and finger tightening the wash arm retainer nut. less than 2 minutes to repair.....and fixed with shipping for less than $22.
0 of 1 people found this instruction helpful.
Were these instructions helpful?

Model Cross Reference

This part works with the following models:

Fix Number: FIX11741334
Manufacturer Part Number: WP3376846
Brand
Model Number
Description
Kenmore
110773811
Dishwasher
Kenmore
110773812
Dishwasher
Kenmore
110773813
Dishwasher
Kenmore
110773881
Dishwasher
Kenmore
110773882
Dishwasher
Kenmore
110773883
Dishwasher
Kenmore
65715755791
Dishwasher - Kenmore Dishwasher Model 657.15755791 (65715755791, 657 15755791) Parts
Kenmore
66513402K900
Dishwasher
Kenmore
66513402K901
Dishwasher
Kenmore
66513409K900
Dishwasher
Kenmore
66513409K901
Dishwasher
Kenmore
66513442K900
Dishwasher
Kenmore
66513442K901
Dishwasher
Kenmore
66513443K900
Dishwasher
Kenmore
66513443K901
Dishwasher
Kenmore
66513444K900
Dishwasher
Kenmore
66513444K901
Dishwasher
Kenmore
66513449K900
Dishwasher
Kenmore
66513449K901
Dishwasher
Kenmore
66513492K600
Dishwasher
Kenmore
66513499K600
Dishwasher
Kenmore
66513592K600
Dishwasher
Kenmore
66513593K600
Dishwasher
Kenmore
66513594K600
Dishwasher
Kenmore
66513599K600
Dishwasher
Kenmore
66513692K600
Dishwasher
Kenmore
66513699K600
Dishwasher
Kenmore
66515522000
Dishwasher
Kenmore
66515524000
Dishwasher
Kenmore
66515529000
Dishwasher