Part Location Diagram of WD12X10163 GE Detergent Dispenser with Rinse Cap
See part 811 in the diagram
Replacing your General Electric Dishwasher Detergent Dispenser with Rinse Cap
( Grid squares measure 1x1 inch )

Detergent Dispenser with Rinse Cap WD12X10163

Works With Model 405062!

Rated by 10 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$83.92
In Stock
Fix Number:
FIX958966
Manufacturer #:
WD12X10163
Manufactured by:
GE
Works With Model 405062!

Product Description

This part releases the detergent and rinse aid into the dishwasher.

Videos For installing this part.

Replacing your Detergent Dispenser with Rinse Cap

Replacing your Detergent Dispenser with Rinse Cap

Questions and Answers

Be the first to ask our experts a question about this part!

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.4 / 5.0, 10 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
Jo-Ann from Reading, PA
Parts Used:
WD12X10163
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
detgerent was seeping from warped despenser
followed the video
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from North Ridgeville, OH
Parts Used:
WD12X10163
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The detergent dispenser would not close
The video was excellent and made the job a snap. I turned off the electricity off at 3:33pm,followed the instructions which explained everything,and electricity back on at 3:41pm.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Neil from Oro Valley, AZ
Parts Used:
WD12X10163
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Detergent dispenser flap latch would not latch
Remove inner door panel. Remove and replace dispenser unit. Reassemble inter door panel.... It helps if you tape the dispenser in place from the inside of the door panel so that you can properly place the retainer brackets and start the screws. I also put a small amount of plumbers valve grease on the dispenser seal just to prevent lea ks. If you have one, use a screw gun as there are a bunch of screws to remove/reinstall.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roy from Mableton, GA
Parts Used:
WD12X10163
Difficulty Level:
Very Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
soap dispenser not dispensering
watch video
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robin from Santa Rosa beach, FL
Parts Used:
WD12X10163
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Dispenser door wouldn't lock
i watched the instructional video once, then watched it again and paused as needed. I've never attempted to fix anything before!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Glenn from Holly Springs, NC
Parts Used:
WD12X10163
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
soap despenser would not release door
Used video instruction on utube
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gregory from Warrenton, VA
Parts Used:
WD12X10163
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
The detergent dispenser was not properly functioning
I removed the screws holding the door together. Then I was able to remove the electrical connections with a pair of pliers. Then I was able to remove the 6 screws that held the dispenser in place. I installed the new dispenser easily and reassembled the door in reverse order based on how I took it apart.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Cincinnati, OH
Parts Used:
WD12X10163
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Dispenser door catch broken
Followed your video installation recommendations taking care not to overtighten dispenser mounting screws. It leaked! Took apart again, lightly coated o-ring with silicone grease and made fasteners slightly tighter. Reassembled door and all is well.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sheri from Boston, MA
Parts Used:
WD12X10163
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
the dispenser would not lock when closed
we watched the video on your web site. first we turned off the power to the dishwasher. Then we removed all the screws on the door - gently lowered the frame/door down. we disconnected the control panel and set aside. we then removed the screws around the dispenser, popped the old one out and the new one - put screws back in - reattached the control panel - then reattached back to front door panel. turned power back and all fixed. the video was perfect!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Blair, NE
Parts Used:
WD12X10163
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Lock Clip was broke on soap dispenser
Watched the video which made it so easy. Thanks!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX958966
Manufacturer Part Number: WD12X10163
Brand
Model Number
Description
General Electric
40201-0
Dishwasher
General Electric
402011
Dishwasher
General Electric
40205-0
Dishwasher
General Electric
402051
Dishwasher
General Electric
40206-0
Dishwasher
General Electric
402061
Dishwasher
General Electric
402070
Dishwasher
General Electric
403110
Dishwasher
General Electric
403111
Dishwasher
General Electric
405010
Dishwasher
General Electric
405011
Dishwasher
General Electric
405012
Dishwasher
General Electric
405050
Dishwasher
General Electric
405051
Dishwasher
General Electric
405052
Dishwasher
General Electric
405060
Dishwasher
General Electric
405061
Dishwasher
General Electric
405062
Dishwasher
General Electric
4070100
Dishwasher
General Electric
4070110
Dishwasher
General Electric
4070500
Dishwasher
General Electric
4070510
General Electric
4070600
Dishwasher
General Electric
4070610
Dishwasher
General Electric
4070800
Dishwasher
General Electric
4070810
General Electric
4071100
Dishwasher
General Electric
4071110
General Electric
4071120
Dishwasher
General Electric
4071500
Dishwasher