Ratings submitted by customers like you who bought this part.
?
$19.96
In Stock
Fix Number:
FIX3486910
Manufacturer #:
WD12X10327
Manufactured by:
GE
Product Description
If the upper rack in your dishwasher is not sliding in and out properly, the rollers may need to be replaced. Faulty rollers can also cause your rack to fall off the track, the door may not close properly, and can make the machine noisy while operating. To replace this part, you will need a flat blade screwdriver in order to remove the rail stop clips from the track, which allows you to completely remove the top rack from your dishwasher. Once you have the top rack on a suitable work surface, the old rollers easily pop off and the new ones can be clipped into place. This kit comes with four genuine OEM rollers and axles, which are white in color and made of plastic.
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products
Dishwasher
Fixes the following symptoms
Door won’t close, Not cleaning dishes properly, Noisy, Door latch failure
If the upper rack in your dishwasher is not sliding in and out properly, the rollers may need to be replaced. Faulty rollers can also cause your rack to fall off the track, the door may not close properly, and can make the machine noisy while operating. To replace this part, you will need a flat blade screwdriver in order to remove the rail stop clips from the track, which allows you to completely remove the top rack from your dishwasher. Once you have the top rack on a suitable work surface, the old rollers easily pop off and the new ones can be clipped into place. This kit comes with four genuine OEM rollers and axles, which are white in color and made of plastic.
Works with the following brands:
General Electric, Hotpoint, Kenmore
Works with the following products:
Dishwasher
Fixes the following symptoms:
Door won’t close, Not cleaning dishes properly, Noisy, Door latch failure
Part# WD12X10327 replaces these:
AP4980629, 1811003, WD12X10327, WD12X0330, WD12X0356, WD12X0357
...
Show more, WD12X0383, WD12X0385, WD12X330, WD12X356, WD12X357, WD12X383, WD12X385 Show less
Videos For installing this part.
Replacing your Upper Roller and Axle - Kit of 4
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gary
February 6, 2023
Will the roller kit in the video work on an older model general electric diishwasher upper basket. Some of the rollers on my upper basket have worn and are no longer functional. The rollers are not identical to the ones indicated in the video but seemingly would work/fit in my dishwasher. So are the rollers indicated in the video universal & would they work on any model? If not, what rollers/part # would fit? Thanks!
For model number GLDA696M0SS
Hello Gary, thank you for contacting us. According to our research, the upper rack wheel, part number FIX1481882, is the compatible part for your model. It is sold individually. It allows the upper dishrack to slide in and out of the dishwasher. Glad to be of assistance!
The rack slide end cap attaches to the rails of the upper dishrack, to prevent it from sliding all the way out. It is a one-inch white plastic part that can break over time. This might be the part you need if you are not...
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Fresh Flow Produce Preserver is made for your refrigerator to help keep produce fresh for longer by absorbing the chemical, ethylene, that causes your fruits and vegetables to ripen quicker. Your produce could be fresh f...
Affresh dishwasher Cleaner is specially formulated to help remove limescale and mineral build-up that can be unsightly and could affect your dishwasher's performance. Each tablet is designed to clean inside your machine ...
Make your cooktop shine with Frigidaire ReadyClean Glass and Ceramic Cleaner. Our scratch-free, streak-free formula removes smudges, grease, burnt-on food, dirt and oil, while protecting and polishing to repel dust and d...
Broken roller wheel on the right side of upper rack.
I bought these parts for my girlfriend, had them sent to her house, and before I could get there to help her fix the dishwasher, she had done it herself! She reported that it was straightforward and was not nearly as difficult as she dreaded it would be. I think her comment was, 'I should have done this a LONG time ago vs just putting u
... Read morep with it being broken!' Don't be afraid to dig in there and do it yourself; you'll be amazed at the self-confidence and sense of satisfaction you get from the repair.
The 2 top front rollers had come apart, which made the rack hard to slide out and the rollers come apart. Would not hold any weight.
I used the flat screwdriver to pry the end cap (2) from each of the slide rail's. Then pulled the rack out and removed all 4 of the roller and Axle. To remove them, they just are clipped onto the rack so just in clip them. You might want to use the screwdriver. Snap the new ones into place and slide the rack back in the rail's and put th
... Read moree end caps back on. Job complete.
The rollers roll inside of a 'C' shaped channel that is capped on both ends with a plastic insert. The most confusing problem was how to get the plastic inserts out without breaking them. The trick to removing the end cap on each side is to pry the rear tab on the cap backwards until it clears the C channel then it can easily be moved o
... Read moreutside of the channel and the end cap comes out easily. After both end caps are removed the entire top rack slides out and the new rollers can be easily snapped in place. Once you know the trick about the end caps, they can be easily popped back in place to secure the top rack again.
You have the best repair-parts site on the web. Easy to navigate and purchase, the parts arrived on time and the instructions were clear and accurate. Nice!
remove end caps remove upper rack remove roller assemblies and replace with new ones install rack and replace end caps. note buy new end caps at the same time they are cheap and make the job easier
Upper rack would not stay in wheel track because wheel axel was broken.
Removed the side track keeper wheels and rack rail. Removed end stopper in rack rail ends. Replaced all four rollers and axels. NOTE: The removal of the track end piece was tricky but by turning the keeper CCW the stopper came right out and I was able to replace the old wheels and then reassemble the racks and axels. Piece of cake.
Slide the drawer part of the way out. Using the screwdriver, pry the end caps off off the drawer glides. Snap the roller/axle off of the drawer and remover the wheel from the glide. Replace the axle/roller. Put the end caps back on. WATCH THE INSTALLATION VIDEO! IT IS VERY HELPFUL!
removed upper basket from dishwasher. remove old roller and axles (4). These slip off of basket. Mine were brittle and actually broke off. Slip new rollers in place; install basket. To remove basket you need to remove clips from front channels. Pull inside flap down and it will come out; reverse process to install.
First, emptied the dishwasher of all items and water. Second, checked to see if there were any clogs. Third, found make and model of the dishwasher and looked it up in Fix.com Fourth, found the issue - drainplug needed replacing. Fifth, ordered the correct OEM parts. Sixth, installed and tested - works like new.
5 of 17 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
2
Next >
★
Customer Reviews
Average Rating:
(2 Reviews)
5.0
★★★★★
★★★★★
Filter By Rating:
5★
2
4★
0
3★
0
2★
0
1★
0
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Robert S - May 5, 2020
Verified Purchase
Very pleased
The pictures/videos were very helpful ensuring I was purchasing the correct product., as well as, installing the parts once received. Very pleased
★★★★★
★★★★★
Keith S - December 3, 2019
Verified Purchase
Awesome
Such a simple fix for something I had a tough time rolling out.
Model Compatibility
This part works with the following models:
Fix Number: FIX3486910
Manufacturer Part Number: WD12X10327
Item is in stock and will ship today if your order is placed before 4:00 PM Eastern Standard Time.
If your order is placed after 4:00 PM EST, the in stock items will ship on the next business day.
On Order
Item is not in stock and usually ships 3-5 business days from the time you place your order.
Special Order
Item is not in stock and usually ships 10-15 business days from the time you place your order.
NLA - No Longer Available
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.