Part Location Diagram of WD8X227 GE Corner Tub Baffle - Lower Right
See part 26 in the diagram
Replacing your General Electric Dishwasher Corner Tub Baffle - Lower Right
( Grid squares measure 1x1 inch )

Corner Tub Baffle - Lower Right

Works With Model 1200L02!

Rated by 19 customers 

?

Really Easy 

15 - 30 mins 

Ratings submitted by customers like you who bought this part.

?
$25.92
In Stock
Fix Number: FIX263963
Manufacturer #: WD8X227
Manufactured by: GE
Works With Model 1200L02!

Product Description

The corner tub baffle is made of black plastic, and is used to prevent water from leaking out of the dishwasher while it is operating. This genuine OEM part is for the lower right-hand side of your dishwasher. This part works in conjunction with a matching left-hand baffle that is sold separately. We recommend replacing both the left- and right-hand baffles at the same time, as this ensures that they wear evenly. Replacing this part does not require any tools, as it uses a friction fit to stay in place.

Videos For installing this part.

Replacing your Corner Tub Baffle - Lower Right

Replacing your Corner Tub Baffle - Lower Right

Questions and Answers

Be the first to ask our experts a question about this part!

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 4.5 / 5.0, 19 reviews.
  • 1
  • 2
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
  • Customer:
    spencer from wells, ME
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
leakage at corners
remove worn baffles. replace with new. no more leaks. be sure to clean area of any residue before installing new baffles.
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Dishwasher was leaking
my 15 year old dishwasher still runs great but suddenly started leaking a bit. After inspecting the gasket I determined it was pretty worn so I removed the 6 or 8 Phillips head screws and separated the door. In addition to the worn gasket the little plastic corners feet in the bottom of the door seat seemed worn. Additionally, I was getting chunks of what looked like black plastic appearing from time-to-time. Once I had the door apart it was apparent that the "plastic" was pieces of the noise dampening stuff that's taped on the plastic door. Over the years it looked like that had melted and slid down the door. So I ordered all of those pieces - it came to something around $30 for all of the pieces. So putting it all back together was not a challenge - I cleaned up everything well including using a paper towel covered tooth pick where the gasket goes, put the gasket in, the little middle piece of the gasket, the black feet in the bottoms of the door, removed all of the melted noise damper and placed the new one on then put the door back together and refastened the 8 screws. We loaded up the dishwasher and started the cycle. I was very disappointed to see that the thing still leaked! Then, my wife said, "ever since we got that new soap it's been leaking". When I looked at the little soap balls carefully I realized it was laundry detergent and not dishwashing soap! No doubt that my dishwasher is much better off after the changes BUT, before you start ordering and disassembling, check the soap to ensure it's actually dishwasher soap ... laundry detergent bubbles will leak!
3 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    phillip from birch run, MI
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
gasket insert fell out, one end was missing.
removed seven screws from the inner panel, not really necessary. spent more time cleaning than replacing the parts. your online video was a great help, I am 75 years old. thanks.
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    CHRISTY from LOGAN, OH
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
water leakage during cycle
inserted new baffles to replace old deteriorated ones
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Leigh from KENT, WA
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
Both the lower left and lower right original corner rubber baffles had disintegrated.
Removed what was left of the original baffles, made sure the area was clean of any debris and installed the new baffles. Everything worked well!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Randy from Wylie, TX
  • Parts Used:
    WD8X228, WD8X227, WD24X10018
  • Difficulty Level:
    Easy
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers, Socket set, Wrench (Adjustable)
Dishwasher was not draining completely.
Remove the bottom rack. Put a block under the front edge of the opened door to keep the pressure off the hinges as I worked. I removed the two screws holding the cover inlet (506) and removed the cover sump (509) and the filter sump (508). I took a screwdriver to pry up the washers that secured the large screen just below the heating element. I removed the standing water with a wet vacuum and cleaned the sump and inlet parts. Removed the right screw that held the supt calrod (112). Removed the two screws that held the filter frame (543) and unscrewed the piston and nut assembly (564) which was completed deteriorated. Installed the new piston and nut and replaced all the pieces removed earlier. Removed the corner tub baffles (26) and replaced with new ones. I did not use the valve body gasket. The dishwasher is working perfectly after multiple uses.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
dishes weren't coming out clean
Researched the internet and found parts supplier who had the replacement parts suggested and how to videos. Only difficulty was the old piston & nut assembly which was "frozen tight in place". Had to muscle it out. Rest of repair couldn't have been much easier. Once old parts were replaced, dishes seem to be coming out better. For now this beat spending $$ for a new dishwasher.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Tatyana from Mashpee, MA
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Liking
Install new parts during One minute by my hands
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Paula from Reno, NV
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Dishwasher didn't fully drain.
Just pop out old baffle and pop in the new. No tools are needed. Extremely easy installation.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    david from divide, CO
  • Parts Used:
    WD8X228, WD8X227
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
water leak
It was simple. Just pulled old part out by hand ,and pushed new one in with my finger just as shone on your vidio
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1
  • 2
Model Compatibility
This part works with the following models:
Fix Number: FIX263963
Manufacturer Part Number: WD8X227
Brand
Model Number
Description
General Electric
1200L02
Dishwasher - DISHWASHER
Kenmore
18385
Dishwasher - DISHWASHER
General Electric
3000B10
Dishwasher - DISHWASHER
General Electric
3000W10
Dishwasher - DISHWASHER
Kenmore
361402891
Dishwasher - Kenmore Dishwasher Model 36.1402891 (361402891, 36 1402891) Parts
Kenmore
3631401190
Dishwasher
Kenmore
3631401191
Dishwasher
Kenmore
3631401590
Dishwasher
Kenmore
3631401591
Dishwasher
Kenmore
3631401592
Dishwasher
Kenmore
3631401890
Dishwasher
Kenmore
3631401891
Dishwasher
Kenmore
3631401892
Dishwasher
Kenmore
3631402190
Dishwasher
Kenmore
3631402191
Dishwasher
Kenmore
3631402192
Dishwasher
Kenmore
3631402590
Dishwasher
Kenmore
3631402591
Dishwasher
Kenmore
3631402592
Dishwasher
Kenmore
3631402890
Dishwasher
Kenmore
3631402891
Dishwasher
Kenmore
3631402892
Dishwasher
Kenmore
36314031000
Dishwasher
Kenmore
36314031001
Dishwasher
Kenmore
36314032000
Dishwasher
Kenmore
36314032001
Dishwasher
Kenmore
36314038000
Dishwasher
Kenmore
36314038001
Dishwasher
Kenmore
36314039000
Dishwasher
Kenmore
36314039001
Dishwasher