Dishwasher Bottom Door Gasket

This dishwasher door gasket is attached to the bottom of the door, creating a strong seal between the tub and the outer edge of the door. This seal is prone to wear and tear due to its constant exposure to water, detergent, and food particles. If the gasket appears cracked, broken, or you notice a leak coming from the door, it will need to be replaced immediately. This gasket measures approximately 23 inches long. For this simple repair, no tools are necessary. Open the dishwasher door and remove the bottom rack. The gasket is located right along the bottom of the door, molded inside the channel. It is held in place in the groove across the bottom. Remove the old gasket by pulling it out with your hands. Take your new silicone gasket and line it up so the notch fits into the groove and slide it in place until it is secure. Reinstall the lower dishrack. We recommend leaving the door closed for a few hours to ensure the gasket is sealed tightly.

• Works with the following brands:
  Frigidaire, Kenmore, Crosley, Gibson
• Works with the following products:
  Dishwasher
• Fixes the following symptoms:
  Leaking, Not cleaning dishes properly, Door won’t close, Door latch failure
• Part# 809006501 replaces these:
  AP5809675, 154297601, 154297602, 154297603, 154576501, 154588201 ... Show more , 154759101 Show less