Single Rack Roller Kit

At first I thought the Timer was bad because it was stalling. The Timer only malfunctioned in High Temp Wash or High Temp Rinse mode. After removing and checking the timer, I determined it was working OK. Someone mentioned that a bad thermostat could cause the Timer to stall, but I wasn't having any problems with hot water temperature. I ... Read more noticed the detergent wasn't dissolving completely, and the water flowing into the tub sounded weak, so I replaced the water inlet valve. This solved all my problems. Dishes are coming out sparkling clean and the Timer doesn't stall in High Temp mode. I just followed the video on Part Select to make the repair. I didn't pull out the whole dishwasher from the counter and I removed the Lower Door panel in addition to the Kick Plate. Removing the Lower Door Panel provided easier access to the valve. I hope this helps other people troubleshoot their dishwasher. Once again this site saved me a chunk of money.

We dropped in the new basket and snapped on the new rollers. Works great

clipped the new retainer into the new wheel and slipped it on. Wheels must come in two widths. The new one I purchased was narrower than the old one, but it works fine

all i had to do is to snap the new wheels on.