Bucket Water Level Switch 1188814
Works With Model AD40G1!
$102.68
In Stock
- Fix Number:
- FIX992307
- Manufacturer #:
- 1188814
- Manufactured by:
- Whirlpool
Works With Model AD40G1!
Jump to:
Product Description
This part is used to prevent water overflow when the bucket gets full.
-
Works with the following brands:Whirlpool, Roper, Kenmore
-
Works with the following products:Dehumidifier
-
Part# 1188814 replaces these:AP3882383, 1174223, 1168699, 1186199, 1186480, 1188814
- Works with the following brands:
- Whirlpool, Roper, Kenmore
- Works with the following products
- Dehumidifier
- Part# 1188814 replaces these:
- AP3882383, 1174223, 1168699, 1186199, 1186480, 1188814
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Bernard from Bridgewater, NJ
- Parts Used:
- 1188814
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Swap out bucket water level switch
The Bucket Water Switch Level Failed. The switch which tells of a fulI water bucket failed the light light would stay on and the dehumidifier would not run even if the bucket was empty.I ordered the part from this site using the model # and manufacturer.Since The part as instock it arrived quickly. To repair/Replace switch first unplug t
... Read more
he unit, then unscrew with phillips head screw driver all outer housing screws. The swich is in a plastic holder attached to an inside wall. first label the 3 wires and where they are attached to the switch. Disconnect the wires from the switch.Pinch the switch holder and pull out switch and holder from the front of the unit. The new switch holder is different in my old model so i removed the switch from the new holder and placed it in the old holder. Now slide the new switch back into the unit from the front until it snaps in firmly. Attach the labeled wires to the switch contacts. Place the metal side housing back in place and screw on. Attach the top of the unit by aligning it with the hole on the top of the unit slide it back on the unit it sould lock into place. Plug the unit in and press the little plunger in and the light on top will illuminate and the unit will stop running
Read less
1 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX992307
Manufacturer Part Number: 1188814
Manufacturer Part Number: 1188814
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.