See part 12 in the diagram
( Grid squares measure 1x1 inch )
Surface Ignitor
Easy
15 - 30 mins
$39.23
Fix Number: FIX11747432
Manufacturer #: WP9782116
Manufactured by:
Whirlpool
-
Product Description
Also known as Spark Electrode. This part helps your burner ignite and produce flame.
-
Works with the following brandsKitchenAid, Whirlpool
-
Works with the following productsCooktop, Range
-
Fixes the following symptomsGas igniter glows, but will not light, Will Not Start
-
Part Number Cross ReferencePart# WP9782116 replaces these:AP6014195, 9782116
Questions and Answers
Product Description
Also known as Spark Electrode. This part helps your burner ignite and produce flame.
-
Works with the following brands:KitchenAid, Whirlpool
-
Works with the following products:Cooktop, Range
-
Fixes the following symptoms:Gas igniter glows, but will not light, Will Not Start
-
Part# WP9782116 replaces these:AP6014195, 9782116
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Installation Instructions Provided by Fix customers like you.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
-
Customer:Ed from Scottsdale, AZ -
Parts Used:WP9782116 -
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers, Socket set, Wrench (Adjustable)
Ignitors slow to light the gas
Remove the grates, knobs and burner caps. Remove the burner base using a T-20 torx bit. The cooktop can now be lifted and set to the side. Remove the draw in front of the cooktop and you'll see two black Phillips screws on each side that holds in the support bars that the gas tubes are attached to. Using an adjustable wrench, remove and set to the side all 4 gas supply tubes. Lift out the support bars and disconnect the wires that are connected to the igniters. Noting the position of the gas tube and location of the Phillips screw, remove the screw Next remove the Phillips screw that holds the igniter to the gas tube orifice and replace it with the new igniter. Reverse the process to reinstall and repeat the process to replace the other igniters. Make sure to double check the brass gas tubes nuts to make sure they are tight. The gas tube orifices can be moved around a bit to align with the burner base as they can be slightly misaligned after reassembly.
Was this instruction helpful to you?
Thank you for voting!
Model Compatibility
This part works with the following models:
Fix Number: FIX11747432
Manufacturer Part Number: WP9782116
Manufacturer Part Number: WP9782116
Brand
Model Number
Description