This is a push-and-turn switch. This kit includes all necessary hardware to install the part. Switch comes with a D-shaped shaft.
Works with the following brands:
Jenn-Air, Hoover
Works with the following products:
Cooktop, Range
Fixes the following symptoms:
Element will not heat, Will Not Start
Part# 700855K replaces these:
AP4087111, 2640, 700855K, 7-0009, 7-0855, 700009
...
Show more, 70009, 700855, 700855K, 700855KVP, W10116762, W10894486, Y700009, Y700855
Show less
Questions and Answers
Ask our experts a question about this part and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched. Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
James
March 2, 2023
Does the image truly reflect the item. The switches I have received do not look like the original part.
For model number 2380EGS
Hello James, thank you for the question. The Surface Unit Infinite Switch Kit, part number FIX2076107, works with the exact model. Sometimes the manufacturer just changes the shape but its function should be the same. We hope this information helps!
Was this helpful?
Thank you for voting!
Bill
April 16, 2022
will this replace Infinte 240P-871 burner switch in Jenn Air model C201?
For model number c201
Hello Bill, thank you for your question. Yes, the part FIX2076107 is compatible with the Jenn Air model C201. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Armando
August 19, 2022
Is this for an 8 inch surface element and does it have a d shaft?
For model number C222
Hi Armando,
Thank you for your question. This part has a d-shaped shaft and it is used for the 8 inch burner. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related PartsAdditional or alternate parts to consider.
This surface burner knob is two inches in diameter. It is a black knob with a chrome trim, and white numbering denoting the temperature level of the surface burner. Sold individually. This knob accepts a D-shaped shaft.
$31.40
In Stock
Installation Instructions Provided by Fix customers like you.
Average Repair Rating: 4.3 / 5.0, 6 reviews.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
Turned power off, Removed knobs, then we removed oven door so could access the infinity switch easier. Remove screws And cover, pulled switch out. It was not very easy. connections had short wires. Took one connection off at a time then put it on the replacement part. Then put the new switch back in tighten down the screws replace the cover the door and turn the power on. And it all worked.
Turned off electrical power to the unit.Pulled cover , took the module where the switch was located. Unpluged the wires from old unit and installed them on the new unit. Simple. Replaced cover and turned on the power and wala!
My cooktop infinity switch shaft had sheared of and would not operate
Took of the exhaust grate,loosened 2 screws and pulled up on the switch unit(with the power off)Removed the knurled nut holding the switch and removed the wires(one at a time)and replaced them on the new switch,put the nut back on,and positioned the top unit back and replaced the two screws.Turned the power back on and tried it.Worked fined.
The front left burner switch failed to make connection
First thing of course is to turn off the power to the stove. After unscrewing the front control panel which is held by four screws, I simply removed the old switch by using some slip point pliers. Since the panel had so many other wires attached, I simply balanced the panel next to my body. Next, I removed and repositioned on the new switch, one by one, each of the five electrical connectors. Next, I mounted the new switch onto the panel, tightening the flat nut with pliers. Then repositioning the panel and fastening the four screws, I was finished. Very easy.
Removed four screws to move control panel. It swings up and exposes the wire installation. Remove faulty switch and remove wires and install the new switch wires like the old ones. It is such an easy repair that anyone can do it. I really mean any one. Doing it yourself will save you an easy hundred dollars. At least. Go for it. Explain exactly what switch is involved when ordering and the rest is easy. Go for it.
0 of 1 peoplefound this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
< Prev
1
Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX2076107
Manufacturer Part Number: 700855K
