Burner Head WP3403M075-10
Works With Model JDS9860AAP!
$158.44
In Stock
- Fix Number:
- FIX11741675
- Manufacturer #:
- WP3403M075-10
- Manufactured by:
- Whirlpool
Works With Model JDS9860AAP!
Jump to:
Product Description
This surface burner head is for ranges. Surface burner head distributes the gas through holes or slots to create an even flame across the cooking area. Shut off the gas supply and unplug the range before installing this part. Wear work gloves to protect your hands.
-
Works with the following brands:Jenn-Air
-
Works with the following products:Cooktop, Range
-
Fixes the following symptoms:Will Not Start, Gas smell, Element will not heat
-
Part# WP3403M075-10 replaces these:AP6008535, 3403D075-10, 3403M075-10, 74005892
- Works with the following brands:
- Jenn-Air
- Works with the following products
- Cooktop, Range
- Fixes the following symptoms
- Will Not Start, Gas smell, Element will not heat
- Part# WP3403M075-10 replaces these:
- AP6008535, 3403D075-10, 3403M075-10, 74005892
Part Number Cross Reference
Questions and Answers
Be the first to ask our experts a question about this part!
✖
Ask a Question
Ask our experts a question on this part and we'll respond as soon as we can.
Sorry, we couldn't find a match for "".
Here's a guide for finding your model number.
Something went wrong. Please try again later.
Your Question Has Been Submitted!
Our experts will send you an email as soon as your question has been answered.
Related Parts Additional or alternate parts to consider.
View More
View Less
Installation Instructions Provided by Fix customers like you.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing installation instruction that matched.
- Customer:
- Hal from Chatsworth, GA
- Parts Used:
- WP3403M075-10, 74004053
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Screw drivers
Rusted gas burners
Removed 4 burners from cooking module.A hammer works from the bottom of the burner to loosen up all the rust.Cleaned all the rust off the burner plate.Before installing the new burners. I filled the inside bottom cavity with muffler repair paste from Auto Zone.It comes in a plastic container. The purpose is to keep the burner from rusting
... Read more
over time when hot and exposed to air and failing again.Installed the burners in the pan and coated the exposed metal with same repair paste.Let the unit dry for 2 days.Installer ignitor parts.Installed gas feed tubes, Ground wire from both ignitor base screws to bottom cover screw. The purpose is to assure a good ground to base.Re-connected feed wire to ignitor base plugThe biggest cause of module failure is rust. Placed units back in the unit and no problems.All four burners fired right up.$190.vs $600 new modules. This will probably last for years.Jen Air is not going to be very happy that I won't be buying their whole module replacement package @ $300 each every three years.If you pay 3 grand for a cooktop it should last longerThanks guys for making individual parts available.It takes a little time but, in the long run, it's worth it!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steve from Woodland, CA
- Parts Used:
- WP3403M075-10
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
rusted out burner head and the gas was coming from all sides and didn't ignite efficiently
the cost for an entire burner assembly was as high as $400 so I was thrilled to discover just the burner head for $30. this would have been a lot easier had the wire not rusted out so I had to do a little electrical work. water gets in there from boil overs excetera and starts to corrode all the metal. the burner head itself fit in ver
... Read more
y nicely and was super easy to install and worked perfectly the first time and ever since. I am so thankful to this site and would recommend this installation for anyone, what a great savings!!!!
Read less
1 person
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cynthia from Mulberry, FL
- Parts Used:
- WP3403M075-10, 74004053
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers, Wrench (Adjustable)
Top burner heads and igniters on slide in gas stove\oven were rusted and corroded
We did not do the repairs ourselves. We hired a gas company technician to exchange the new head and igniter for old. We were surprised that the burner heads did not come with the screws necessary to complete the job. The technician had to locate screws in his personal collection.
0 of 1 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
- < Prev
- 1
- Next >
Model Compatibility
This part works with the following models:
Fix Number: FIX11741675
Manufacturer Part Number: WP3403M075-10
Manufacturer Part Number: WP3403M075-10
Brand
Model Number
Description
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.