Part Location Diagram of 70070047 Echo Shredder Section
See part D-800 in the diagram
( Grid squares measure 1x1 inch )

Shredder Section 70070047

Works With Model SH-8000E!

Rated by 1 customers 

?

A Bit Difficult 

More than 2 hours 

Ratings submitted by customers like you who bought this part.

?
$43.12
In Stock
Fix Number:
FIX9295545
Manufacturer #:
70070047
Manufactured by:
Echo
Works With Model SH-8000E!

Product Description

Questions and Answers

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Affresh Washing Machine Cleaner - 3 pack
$12.58
In Stock
Produce Preserver Filter
$21.50
In Stock
Affresh Dishwasher Cleaner Tablets - 6
$19.09
In Stock
Cooktop Cleaning Cream
$15.57
In Stock
Cooktop Cleaner
$17.74
In Stock
Affresh Cleaner
$19.09
In Stock

Installation Instructions Provided by Fix customers like you.

Average Repair Rating: 2.0 / 5.0, 1 reviews.
  • 1
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Customer:
ALBERT from ANNANDALE, NJ
Parts Used:
70070047
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Discharge grate broke off and went into the shredder knives
Remove the 8 - 5/16 lock nuts from the shredder hopper and work the panel off the bearing. Tape the discharge door up and out of the way. Remove the 5/16 x 3/4 bolt from the bottom of the discharge grate. Pull the bottom of the grate out then bend the top of the grate down until it releases from the slot at the top of the hopper and then pull it out. Access to the knives is limited so be patient. Next you remove the 10/24 socket head bolt. I used a pair of locking pliers to hold the head because the socket will be packed with wood chips. Remove the lock nut and pull the bolt out the shaft that holds the 4 knives and spacers. Take note how the spacers go back. The lengths vary so they offset the knives from the next group. Pull the shaft out keeping track of the spacer placement. Install the 4 knives and spacers on the 1/2” shaft then put the 10/24 bolt and lock nut back in. Repeat this for next 3 shredder shafts until all 16 knives 4 on each shaft are back on the 4 - 1/2” shafts. I also put bearing grease on the shafts during the install. After all the knives are installed the side panel on the hopper goes back on taking care of the bearing placement on the drive shaft. Tighten all 8 - 5/16 lock nuts. Reinstall the discharge grate making sure the bend at the top goes back into the slot at top of the hopper. Install the bolt at the bottom of the grate and return the discharge door to its operating position.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • 1

Model Compatibility

This part works with the following models:
Fix Number: FIX9295545
Manufacturer Part Number: 70070047
Brand
Model Number
Description
Echo
SH-8000
Chipper Shredder - Chipper/Shredder
Echo
SH-8000E
Chipper Shredder - Chipper/Shredder
Echo
SH-8000IC
Chipper Shredder - Chipper/Shredder
Echo
SH-8000R
Chipper Shredder - Chipper/Shredder