Trash Compactor Parts

Popular Trash Compactor Parts

Door Catch Kit
$5.04
In Stock
★★★★★
★★★★★
10 Reviews
Fix Number
FIX334230
Manufacturer Part Number
279570
This kit includes two door strikes, and three door catches, to service doors that have one or two catches. The strike is mounted on the body of the dryer, while the catch is mounted on the dryer door. These two parts work together to keep the dryer door shut while in operation. If your appliances lid will not close, or it will not start, it may be time to replace the door catch. If this part is malfunctioning, it should be replaced immediately, as it is not safe to run a dryer with the door not properly closed. This kit also comes with a set of instructions to help with the repair.
Fixes these symptoms
  • Door Pops Open
  • Door won’t close
  • Lid or door won’t close
  • See more...

Installation Instructions

jeffrey from Brookhaven, PA
Dryer would run, but not heat
Needed it running quick, so no diagnostics. Ordered one of everything that could fix problem (plus a new door catch). Tipped it onto it's back & popped the bottom cover off. Element, thermal cutoff, thermistor, and fuse. were right in front and held by 2 screws each (don't drop them, don't ask). A little bit tight inside, but no big issue. vacuumed the inside, replaced everything (it was the Heating Element, by the way), slapped the cover on, and put it back in its spot. works like it was new. Yes, I unplugged it first. Remember! Safety Third! Read more...
Touch-Up Paint - White
$8.00
In Stock
Fix Number
FIX385132
Manufacturer Part Number
72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

Installation Instructions

Al from Cape Coral, FL
No heat when trying to dry clothes .
Followed instructions on your videos. Everything went as planned and the dryer works like new.... Read more...
Drive Gear Kit
$49.23
In Stock
Fix Number
FIX398589
Manufacturer Part Number
882699
This is a genuine OEM drive gear kit for your trash compactor. It includes the drive gear, pin spring, a retaining clip which is also known as a c-ring, ram stop, and the ram cam. The ram is used to compact the trash and if it is getting stuck, making excess noise, or is not stopping at the end of the cycle, then the drive gear may need to be replaced. Before beginning this repair, please be sure to disconnect the power supply to the trash compactor.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Drawer is hard to open and or close
  • See more...

Installation Instructions

John from RUTHERFORD, NJ
Trash compactor ram was not working.
Watched the video and followed the directions step by step. Read more...
15 Inch Compactor Bags - 15 Pack
$26.44
In Stock
Fix Number
FIX1964579
Manufacturer Part Number
W10165295RP
These bags will fit most 15" rectangular compactors.
Hinge Bracket
$10.73
In Stock
Fix Number
FIX11739061
Manufacturer Part Number
WP2183805
This part is used to support the hinge.
Fixes these symptoms
POWER NUT ASM
$12.64
In Stock
Fix Number
FIX16554596
Manufacturer Part Number
WC02X20287
This power nut is for trash compactor and attaches to the side of the ram and is threaded. As the power screw rotates, it feeds through the power nut pulling the ram down to compact the trash.
Fixes these symptoms

Installation Instructions

Michael from Lakeville, MN
One of the 2 Nut Power nylon screws failed
The "smasher" got jammed sideways when this part failed on one side. Could not open the front door. Had to pull the whole unit out, take to garage and repair. Start by taking bottom panel off. This gives you access to the chain drive. Put on some leather gloves and turn chain CCW until "smasher unit comes loose. Pull out of top of unit (other panels need to be removed and front control panel must be removed also). Now replace both nylon "NUT POWER ASM" parts. If you are handy, you can do this repair easily and save yourself $$$ Read more...
Frame Roller Assembly
$38.98
In Stock
Fix Number
FIX12716561
Manufacturer Part Number
WC17X20084
Fixes these symptoms
Fix Number
FIX11747965
Manufacturer Part Number
WPW10001130
Sold Individually.

Installation Instructions

Margaret from McLeansville, NC
Washing Machine Out of Balance - Missing Leveling Feet
The was an extremely simple repair. Tilted the washer up, placed the nut on the level foot, inserted the leveling foot in the slot and voila! Done. Absolute easiest repair ever. Read more...
Directional Switch
$64.14
In Stock
Fix Number
FIX11744742
Manufacturer Part Number
WP777811
This is an OEM part sourced directly from the manufacturer. This is a top limit and directional switch that is designed for use with trash compactors. This switch will interrupt the current that flows to the motor when the ram reaches the top of the compactor. When the ram reaches the top of the compactor this switch reverses the motor direction. You may have a problem with your switch if you compactor won?t stop running at the end of the cycle. Before you replace this part make sure you have unplugged your trash compactor.
Fixes these symptoms
  • Compactor ram gets stuck
  • Doesn’t stop at end of compacting cycle
  • Noisy
  • See more...

Installation Instructions

Chad from Moreno Valley, CA
Trash Compactor would not stop after cycle and would make a ton of noise
I had a couple of problems with my trash compactor, it was present in the home when we bought it. First it wouldn't turn on, the on/off switch was broken so I replaced the switch and knob assembly. Then the unit would run through a cycle and wouldn't stop at the end and would make a loud banging noise. My directional switch was the suspect at first because it was in bad shape to begin with, looked like it had gotten stuck at some point and bent the arm. I replaced the directional switch and it didn't help. Then I realized that the on/off/start panel showed that the start button was stuck in the on position. This was delivering constant current and wouldn't allow the unit to stop. DON'T spend $150 for a new start/on/off panel. I took the panel off and separated the front from the back to expose the buttons from the inside. The start button was stuck so I took the parts out and reassembled them, they're all little plastic and metal pieces that interlink. After I reassembled the buttons' insides I reassembled the panel and reinstalled it. The unit works fine now. Read more...
RETURN SWITCH
$10.75
In Stock
Fix Number
FIX16542383
Manufacturer Part Number
WC21X20249
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is not completing the compact cycle properly, you may have to test the switch. If you have a multimeter, you can perform a continuity test before ordering this part to determine if a continuous electrical path is present in the switch. If there is no electrical path in your switch, you will need to replace it. This is an authentic replacement part sourced directly from the original manufacturer.
Fixes these symptoms
  • Doesn’t stop at end of compacting cycle
  • Won’t stay on
  • See more...

Brands

Related Pages

Popular Trash Compactor Models