Jenn-Air Microwave Glass Trays and Supports

Microwave Glass Turntable Tray

★★★★★

★★★★★

2 Reviews

The turntable tray rotates in the centre of the microwave to help ensure the food cooks evenly.

Glass Cooking Tray

★★★★★

★★★★★

1 Review

This glass cooking tray, also known as a turntable, is a genuine OEM replacement part for your microwave. The clear glass tray measures approximately 12 inches in diameter, and it is the surface that your dish sits on when heating food. If the tray has become cracked or damaged, it may result in the turntable not rotating, which means your food will not heat evenly. If this happens, the tray should be replaced. No tools are required to replace this part, simply line up the tray with the drive coupling ensuring that the three partial circles connect to the driver.

Drive Coupling This glass tray drive coupling, also known as a tray support, is a genuine OEM replacement part. It can help solve the issue of your microwave tray not turning properly. This motor couple connects the motor to the turntable. To replace this part, make sure the microwave is unplugged first. Remove the glass tray, and the existing coupling. Insert the new coupling into the motor shaft.

Turntable Coupler

★★★★★

★★★★★

1 Review

This part connects the motor to the glass tray to rotate the tray.

Cooking Tray This cook tray is also known as a glass tray, glass plate, or microwave plate. It is clear in color and measures about 14 inches in diameter. It is made entirely of glass. This microwave tray rotates and holds your food as it is being cooked. Pleas consider replacing your turn ring or turn shaft if your microwave plate will not rotate.

RING-TURN This roller is located underneath the glass turntable. With the help of the motor, this roller helps to rotate the glass tray. This part takes the place of the coupling.

RING-TURN

Glass Turntable

Drive Coupling This part has a D-shaft for the motor shaft.

Turntable Guide with Rollers The turntable support (also known as a Ring Turn) fits under the cooking tray and is used to support the tray. This genuine OEM ring turn is made of plastic and has a diameter of approximately 9 inches. If your cooking tray will not turn, check the turntable support ring for signs of damage.