Dryer Filters

★★★★★

★★★★★

1 Review

Fix Number

FIX3531962

Manufacturer Part Number

ADQ56656401

The Dryer's Lint Filter is used to collect lint during the dryer cycle as it passes through the dryer vent, in order to prevent damage to the machine. This manufacturer-approved part comes in gray, measures around 12 inches wide by 11 inches high, and is easy to install. It slides into the lint filter slot in your dryer. If there is visible damage to the screen then it's time to replace the part. We recommend that you thoroughly clean the lint filter before every load, but even with good maintenance, this hard-working part is often damaged or worn over time. If your dryer isn't drying quickly, the filter may be responsible. The manufacturer has made an authorized substitution to the lint filter. Special details: When replacing lint screen ADQ56656401 you may need to also replace lint screen housing MCK49049101 and lint screen guide MEA49050001 to prevent items from catching on the lint screen, depending on your model.

★★★★★

★★★★★

7 Reviews

Fix Number

FIX11763056

Manufacturer Part Number

WE03X23881

This Lint Filter is a genuine OEM part for your clothes dryer. The Lint Filter can be used with both electric and gas models. Proper air flow is essential to the operation of the dryer, and the lint filter helps prevent debris from getting into your ducts and causing obstructions. Regular cleaning of this part is essential to prevent fires and can help your laundry dry more quickly. It may be time to replace the filter if the casing is cracked or the screen is ripped, or it is taking a long time for your laundry to dry. Installation is very easy and no tools are required; simply remove the old filter (just like you would to clean it) and insert the new one in its place.

★★★★★

★★★★★

1 Review

Fix Number

FIX3527575

Manufacturer Part Number

5231EL1001C

A fully functional lint filter is an essential part for your dryer. It helps to trap lint and other debris from your laundry and prevents it from entering the ducts. An excess buildup of lint can be dangerous as it becomes a fire hazard. Regular cleaning of the filter can help to prevent this from happening. If your lint filter becomes damaged, replacing it is an easy repair that does not require any tools. Simply remove the broken filter from your filter and put the new one in its place.

★★★★★

★★★★★

1 Review

Fix Number

FIX3527578

Manufacturer Part Number

5231EL1003B

If the lint filter in your dryer has become damaged, this is a genuine OEM replacement filter. It is important to always run the dryer with the filter in place, as it traps lint and other debris from entering the dryer vents. Without the filter, the vents can become clogged with lint which can prevent your laundry from drying properly along with being a fire hazard. Replacing this part is an easy repair. Simply remove the old filter, and insert the new one in its place. Always be sure to clean the filter between each load of laundry.

★★★★★

★★★★★

2 Reviews

Fix Number

FIX1491676

Manufacturer Part Number

W10120998

If the lint filter in your dryer has become damaged and unusable, it is important to replace it as soon as possible. The filter traps lint and other debris from your laundry, keeping it out of your air ducts. Regular cleaning of the filter helps your clothes to dry faster as it allows for better airflow, and it helps to prevent fires. A vacuum attachment can be used to clean the slot of any debris that the filter did not trap. Replacing this part is an extremely easy repair that does not require any tools. Simply remove the old filter just like you would do to clean it and put the new one in its place. This filter is a genuine OEM part that measures approximately 12.5 inches wide and 10.5 inches long.

Fix Number

FIX7787727

Manufacturer Part Number

ADQ73373201

★★★★★

★★★★★

5 Reviews

Fix Number

FIX11741075

Manufacturer Part Number

WP33001808

This is a genuine OEM replacement lint filter for your dryer. It measures approximately 12.5 inches in length and is made of a nylon mesh material. It is important that your dryer has a lint filter in place, as it prevents lint and debris from building up inside your dryer vents. If lint is allowed to build up, it decreases the efficiency of your dryer and can be a fire hazard. The filter should be cleared of lint after every dry cycle. No tools are required to replace this part, simply remove the old filter and insert the new one in its place.

★★★★★

★★★★★

3 Reviews

Fix Number

FIX11741039

Manufacturer Part Number

WP33001003

This lint filter is a genuine OEM replacement part for your dryer. The lint filter is used to trap debris and prevent it from clogging up your dryer vents. If your lint filter has become damaged it should be replaced. Using your dryer without a lint filter can be a serious fire hazard, along with decreasing the efficiency of the machine. No tools are required to replace this part, simply pull out the old filter and slide the new one into place.

Fix Number

FIX11726200

Manufacturer Part Number

W10828351

This lint filter and cover assembly is a genuine OEM replacement part for your dryer. The filter is used to prevent lint and debris from entering the dryer vents. If the filter has become damaged or is missing, it will need to be replaced. This kit comes as two pieces, the filter itself and the cover. No tools are required to replace this part, simply pull out the old filter and insert the new one in its place.

★★★★★

★★★★★

1 Review

Fix Number

FIX11767017

Manufacturer Part Number

WE18X25100

The lint filter is an important component of your dryer, as it traps lint and other debris from entering the dryer vents, where they can become a fire hazard. If your lint filter has become damaged or is missing entirely, it should be replaced. Clogged lint filters or dryer vents can impact the efficiency of your dryer, and it can take longer for your clothes to dry, or they may still be damp when the cycle ends. Replacing your old filter with this new OEM part is an easy job that does not require any tools. Simply remove the damaged filter, and insert the new one in its place.