Models
>
JUB248RYRP00
JUB248RYRP00 Jenn-Air Wine and Beverage Cooler
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JUB248RYRP00
Viewing 4 of 4Keep searches simple, eg. "belt" or "pump".
$16.30
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
In Stock
$5.41
This is a multi-use screw and can be used on a variety of appliances. The measurements of the screw are: 8/18 x 3/8. *Please note: the screw is sold individually. Refer to the manual provided by the m...
In Stock
On Order
$14.14
This is an authentic OEM replacement part. This screw is commonly used in the assembly of refrigerators, microwaves, ice makers, ranges, and smokers. Due to varied uses we recommend you refer to model...
In Stock
$185.63
This door gasket is used to make an air-tight seal for the cabinet when the door is closed.
In Stock
Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.
No Longer Available
In Stock
$62.00
This device acts like a clock. It continually advances and alternates between activating the cooling cycle and the defrost heater.
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Paul from RCH PALOS VRD, CA
- Parts Used:
- WPW10238068
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
Old Gasket loose. could not fit back in.
Got my son in law to do it
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Amy from JUNCTION, TX
- Parts Used:
- WP22002263
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bulb worked for a couple days and has now burned out, filaments dangling
To replace the light bulb, I removed the screw and the cover, unscrewed the old bulb, replaced with the new bulb and replaced the cover, securing it with the small screw. It worked appropriately with normal use for a few days and then I noticed the light was not coming on when I opened the door.
I removed the cover and pulled ... Read more out the bulb to find that the filaments inside are dangling and burned through. I need them replaced, please.
I removed the cover and pulled ... Read more out the bulb to find that the filaments inside are dangling and burned through. I need them replaced, please.
Read less
Was this instruction helpful to you?
Thank you for voting!