Models
>
WBB247S0FF
WBB247S0FF ((13)) Bosch Washer
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
$83.15
This door boot is for washers. Door boot forms a seal between the wash tub and the door, preventing leaks.
In Stock
$61.53
Shock absorbers keep the washer from vigorous shaking during it's cycles. They are sold individually.
In Stock
In Stock
In Stock
This drive belt is for washers. Drive belt connects the drive motor to the drive system in the washer to spin the basket.
No Longer Available
In Stock
In Stock
In Stock
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for WBB247S0FF
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from ENTERPRISE, AL
- Parts Used:
- 00422174
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The sleeves on this model washer are two different sizes see below
The thickness of the sleeves are 3.0 mm thick on the base of the sleeve. However the sleeve on the bottom of both the upper and lower hinges of this model washer are different sizes. The base of the sleeve on the top of each hinge post is 3.0 mm but the sleeve on the bottom post of each hinge is only 1.2 mm thick. The bracket on the d
... Read more
oor that holds all 4 screws to attach the door to the washer will not fit unless you reuse the old sleeve from the lower posts or reduce the thickness of the disc on the lower post to 1.2 mm. I spent hours trying to get the door back on and finally saw why I couldn't get the screws back in because the bracket could not go in place and sit flush the the washer.
Read less
Was this instruction helpful to you?
Thank you for voting!