Models
>
58226
58226 (1000001-1999999 - 1981) Toro Tiller
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 58226
Viewing 10 of 10(1979)_WW_1.gif "8\" Furrowing Tool Model No. 59008 (optional) Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_2.gif "Briggs And Stratton Engine Model No. 130292-0728-02 Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_3.gif "Carburetor Assembly Model No. 130292-0728-02 Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_4.gif "Chassis Assembly Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_5.gif "Handle Assembly Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_9.gif "Page I Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_6.gif "Pick Tine Kit Model No. 17-8200 (optional) Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_7.gif "Rewind Starter Assembly Model No. 130292-0728-02 Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_8.gif "Slasher Tine Assembly Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
(1979)_WW_10.gif "Tine And Engine Assembly Diagram and Parts List for 1000001-1999999 - 1981 Toro Tiller")
Keep searches simple, eg. "belt" or "pump".
$4.99
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
In Stock
In Stock
In Stock
In Stock
$3.99
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
In Stock
In Stock
In Stock
In Stock
Special Order
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 58226
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from ALFRED, ME
- Parts Used:
- 397358
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this instruction helpful to you?
Thank you for voting!
Replace fuel diaphragm, fuel pickup tube and air cleaner
This 5hp B&G was manufactured in 1985! Had been garage kept and always dependable. After 10 years of non use the carb wasn't getting gas. Removed air cleaner box, muffler and crankcase breather to easily remove carb, replace parts and reassemble.
Was this instruction helpful to you?
Thank you for voting!