Models
>
58226
58226 (8000001-8999999 - 1978) Toro Tiller
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 58226
Viewing 7 of 7(1978)_WW_1.gif "Carburetor Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_2.gif "Chassis Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_3.gif "Engine Briggs & Stratton Model No. 130292 Type 0646-01 Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_4.gif "Handle Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_5.gif "Rewind Starter Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_6.gif "Slasher Tine Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
(1978)_WW_7.gif "Tine And Engine Assembly Diagram and Parts List for 8000001-8999999 - 1978 Toro Tiller")
Keep searches simple, eg. "belt" or "pump".
$4.99
This is a spark plug and it is found in various lawn equipment. If your engine is not starting or running poorly, you may need to replace the spark plug. This part is a RJ9LM. Meaning, it is a resisto...
In Stock
In Stock
In Stock
In Stock
In Stock
$3.99
This is a replacement screw, also known as a shear pin that is used in several pieces of outdoor power equipment. It is made of metal and is approximately 2 inches in length. It is a hex head screw an...
In Stock
In Stock
In Stock
In Stock
Special Order
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 58226
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Thomas from ALFRED, ME
- Parts Used:
- 397358
- Difficulty Level:
- Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers
5 HP Briggs and Stratton chipper shredder - no spark
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this instruction helpful to you?
Thank you for voting!