Models
>
RF28HMEDBSR
RF28HMEDBSR ((AA-03)) Samsung Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for RF28HMEDBSR
Viewing 7 of 7Keep searches simple, eg. "belt" or "pump".
In Stock
A good way to judge whether the filter needs to be replaced is when the water flow to the dispenser starts slowing down and there has been no change to the water pressure to the product. There is no b...
No Longer Available
$125.52
The ice maker assembly contains the complete ice maker and housing. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included.
In Stock
$214.07
This ice tray or ice bin assembly is a genuine OEM replacement part designed for your Samsung refrigerator. The assembly is made of white plastic and has dimensions of 21 inches by 13.25 inches. It is...
In Stock
In Stock
In Stock
On Order
In Stock
$54.92
If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.
In Stock
On Order
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for RF28HMEDBSR
Viewing 5 of 5Fridge too warm
Fixed by these parts
How to fix it
Ice maker not making ice
Fixed by these parts
How to fix it
Door won’t open or close
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Ice maker won’t dispense ice
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Richard from GULFPORT, MS
- Parts Used:
- DA32-10104N
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Evaporator frozen (refrigrator section) and allowing top section to lose cooling
This is the Samsung French door refrigerator style that so many people have complained about freezing up and not cooling the top section. I first changed out the defrost thermostat and this did not correct the problem. I done a quick resistance check on the temp sensor that's mounted on the evaporator itself. The resistance would change w
... Read more
hen holding an ice cube on the sensor so I just assumed it was ok. PLEASE TAKE NOTE: When performing a resistance check on this sensor, make sure your readings match the Samsung temp/resistance chart in their literature. My sensor was way off calibration and was causing the freeze up. Its working as designed now and DW is happy again. Learn from my mistake.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from VISALIA, CA
- Parts Used:
- DA81-06013A, DA97-13756A, DA32-00011D
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Main refrigerator was not cooling down adequately.
I looked up a YouTube video and it gave pretty well laid out instructions on how to replace the Twin fan assembly in the main compartment.
There was also a suspicion that the sensor wasn't working properly and the fan had ice on it.
Once I removed the main housing at the back of the inside of refrigerator it was relatively easy ... Read more to replace the fan motor, and sensor.
You have to follow the disassemble procedure closely in getting the main housing out.
You have to remove the clear plate covering the water filter. Then remove the bottom shelf, which then gives you access to the large white back panel. After that its easy to replace the motor and sensor.
There was also a suspicion that the sensor wasn't working properly and the fan had ice on it.
Once I removed the main housing at the back of the inside of refrigerator it was relatively easy ... Read more to replace the fan motor, and sensor.
You have to follow the disassemble procedure closely in getting the main housing out.
You have to remove the clear plate covering the water filter. Then remove the bottom shelf, which then gives you access to the large white back panel. After that its easy to replace the motor and sensor.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Arlena from CHICAGO, IL
- Parts Used:
- DA29-00020B
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Water filter needed to be changed.
unlock filter with pliers with a turn to the right, pull out and replace filter, Turner new filter to the left until it click in.
Was this instruction helpful to you?
Thank you for voting!