Models
>
KBCA06XPBL00
KBCA06XPBL00 KitchenAid Refrigerator
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for KBCA06XPBL00
Viewing 3 of 3
Manuals & Guides for KBCA06XPBL00
Click to downloadManual
Owner's Manuals
(0.65MB)
Manual
Owner's Manuals
(2.56MB)
Specs
Product Specifications Sheet
(0.04MB)
Keep searches simple, eg. "belt" or "pump".
$16.32
This ten watt appliance light bulb is two inches tall. It is used with both washers and dryers.
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.
No Longer Available
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
In Stock
Order within the next 1 hr and 15 mins and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Amy from JUNCTION, TX
- Parts Used:
- WP22002263
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Bulb worked for a couple days and has now burned out, filaments dangling
To replace the light bulb, I removed the screw and the cover, unscrewed the old bulb, replaced with the new bulb and replaced the cover, securing it with the small screw. It worked appropriately with normal use for a few days and then I noticed the light was not coming on when I opened the door.
I removed the cover and pulled ... Read more out the bulb to find that the filaments inside are dangling and burned through. I need them replaced, please.
I removed the cover and pulled ... Read more out the bulb to find that the filaments inside are dangling and burned through. I need them replaced, please.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patrick from Dunwoody, GA
- Parts Used:
- 4344685
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
door seal needed replaced
remove the door, drillout pop rivits and remove the door skin. remove old door seal and feed new seal into the track that hold the seal to the door. replace door skin and pop rivit in to place. replace door on the refrigeratoe.
Was this instruction helpful to you?
Thank you for voting!