Models
>
UCG1500N0WW
UCG1500N0WW General Electric Trash Compactor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for UCG1500N0WW
Viewing 12 of 12
Keep searches simple, eg. "belt" or "pump".
$10.75
This is a top limit directional switch for a trash compactor. The directional switch reverses the motor direction when the trash compactor has reached the top of the drawer. If your trash compactor is...
In Stock
$12.64
This power nut is for trash compactor and attaches to the side of the ram and is threaded. As the power screw rotates, it feeds through the power nut pulling the ram down to compact the trash.
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Special Order
Special Order
Special Order
Special Order
Special Order
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for UCG1500N0WW
Viewing 3 of 3Doesn’t stop at end of compacting cycle
Fixed by these parts
How to fix it
Compactor ram gets stuck
Fixed by these parts
How to fix it
Won’t stay on
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Brian from HOUSTON, TX
- Parts Used:
- WC21X20249
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Trash compactor would not shut off at end of cycle. Would have to manually turn it off.
Removed compactor from opening. Using screw driver unthreaded 4 screws from top and then removed the on/off dial. Face plate came off easy and provided access to relay switch bank. Unscrewed two screws which allowed both relay switches to be removed and replaced. Recommend replacing both relay switches. Reassembled and compactor work
... Read more
ed fine. Very easy job. If your compactor is making a machine gun noise during the return cycle then this will solve your problem.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from joplin, MO
- Parts Used:
- WC02X20287
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- More than 2 hours
- Tools:
- Nutdriver, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
plastic nut was stripped
replaced drive nuts only problems i had was to adjust shutoff switch
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from GALVESTON, TX
- Parts Used:
- WC02X20287
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers, Socket set
RAM was crooked. Power Nut was stripped.
Followed YouTube instructions. Was relatively easy to dismantle, though on this GE Profile model compactor, needed to partially undo the front panel to provide room to remove the RAM. Works great now!!
Was this instruction helpful to you?
Thank you for voting!