Models
>
PODM301J
PODM301J ((03)) Thermador Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
In Stock
Order within the next 12 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Jaymie from Intercourse, PA
- Parts Used:
- 00642855
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Oven heating temp not turning off at set temp/overheating
Removed the wall oven to access temp probe connector strapped to the back of the oven. removed 2 screws holding probe inside the oven & replaced. Searched for the "fixing kit" thermostat part I was suggested to replace along with the probe. No thermostat type part was found in my oven, even though Bosch says it fits "somewhere". Reinstall
... Read more
ed the wall oven & tested. The temperature is working normal now. Will return the fixing kit.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Libbie K from NAPLES, FL
- Parts Used:
- 11016087
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
One of 3 rings on roller ring appeared broken. The turntable was properly revolving.
I lifted up the microwave ceramic dish and put it on countertop. Lifted out old roller ring and replaced with new one. This took 10 seconds. Carefully placed ceramic microwave dish back atop roller ring and aligned its center over stationary part that rose from bottom center of oven. This keeps ceramic plate in place as it revolves.
... Read more
I canceled pending service call from local appliance repair service and saved $99.
Read less
Was this instruction helpful to you?
Thank you for voting!