Models
>
FGP215EQ6
FGP215EQ6 Roper Range
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for FGP215EQ6
Viewing 4 of 4Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ronald from WILLIAMSTOWN, NJ
- Parts Used:
- 4364147
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
My center grill igniter was not working.
I removed the burners and top cover of the range. I pulled the range from between my cabinets so I could access the wires that go to the igniters. I removed the two screws from the igniter bracket and pulled the broken igniter up from the mounting frame. I cut the wire from the old igniter to make it easier to remove the old wire and ro
... Read more
ute the new igniter wire to the rear of the range. The new igniter had the exact same plugin which made installation a snap. I reassembled the range top top and tested the new igniter. Works perfectly. It took less than 30 minutes.
Read less
Was this instruction helpful to you?
Thank you for voting!