Models
>
JES2150MR1SA
JES2150MR1SA General Electric Microwave
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for JES2150MR1SA
Viewing 1 of 1Keep searches simple, eg. "belt" or "pump".
The roller glide in your microwave rests under the microwave plate, and allows it to rotate when the microwave is running. It is a round plastic ring with 3 wheels spaced out around the perimeter. If ...
No Longer Available
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for JES2150MR1SA
Viewing 1 of 1Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Edward from Indianapolis, IN
- Parts Used:
- WB49X10108, WB02X10895
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
brokencooking dish
easy to handle
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David W. from Dover, OH
- Parts Used:
- WB02X10895
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The little wheels keap coming off.
R & R - Remove old part,cleaned roller grove,Replaced old part with new one.Job done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marshall from CRESTWOOD, KY
- Parts Used:
- WB02X10895
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Broken plastic wheel (Roller) on the turntable plate support roller guide.
Open the shipping package the new roller guide comes in and removed it from the package. Open the microwave door and removed the glass turntable plate. Remove the broken roller guide ring and roller wheel/s. Clean the surface that the roller guide assembly rides on. Place the new roller guide assembly into the microwave. Clean the bottom
... Read more
surface of the glass turntable plate that the roller guide wheels ride on and put the plate back into the oven. Place a cup of water onto the turntable plate close the oven door and start the microwave. Looking through the door assure that the new roller guide assembly is rolling smoothly under the turntable plate. Stop the oven, remove the cup, reset the oven timer.
Read less
Was this instruction helpful to you?
Thank you for voting!