Models
>
51593
51593 (310000001-310999999 - 2010) Toro Leaf Blower / Vacuum
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 51593
Viewing 2 of 2(2010)_WW_1.gif "Bag and Tube Assembly Diagram and Parts List for 310000001-310999999 - 2010 Toro Leaf Blower / Vacuum")
(2010)_WW_2.gif "Impeller and Tube Assembly Diagram and Parts List for 310000001-310999999 - 2010 Toro Leaf Blower / Vacuum")
Keep searches simple, eg. "belt" or "pump".
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Could see the impeller was damaged - blades missing.
Safety First
Note: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and w ... Read more asher- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go.
Note: Ensure the appliance is unplug prior to working on it.
1) Removed the plate at the bottom giving access to the impeller nut
2) Removed the nut with the channel lock pliers by holding the impeller
with one hand and loosing the nut with the other.
3) Removed the old impeller and w ... Read more asher- impeller.
4) Install the new washer-impeller and impeller.
5) Install the new impeller nut and tighten firmly - again holding the
impeller with one hand and tighting with the channel lock pliers.
6) Install the plate at the bottom that gave you access to the impeller
nut.
7) Plug appliance in and turn selector switch to "on" position.
Note: Listen to make sure there is no erratic noises or wining coming
from the motor. If there is none, you are good to go.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joyce from Dayton, NV
- Parts Used:
- 108-8965
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Original part got lost
Snap and blow
Was this instruction helpful to you?
Thank you for voting!