Models > WE261-2011-02

WE261-2011-02 (2011-02 - 96022000801) Weed Eater Lawn Tractor

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for WE261-2011-02

Viewing 7 of 7
Chassis_Enclosures
Decals
Drive
Electrical
Miscellaneous Parts
Mower_Deck__Cutting_Deck
Steering
Keep searches simple, eg. "belt" or "pump".
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for WE261-2011-02

Viewing 1 of 1
Will Not Start
Fixed by these parts
How to fix it
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    James from OAKFIELD, ME
  • Parts Used:
    532430645
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
Primary chain worn out
The primary chain was worn out
Got a new one took out one link and replaced it with a master link#35 then cut off the old primary chain and installed the new one
Only required jacking the machine up and no disassembly of the unit
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Gary from PILESGROVE, NJ
  • Parts Used:
    532123583
  • Difficulty Level:
    Very Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Steven from Hickory, NC
  • Parts Used:
    532177968
  • Difficulty Level:
    Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Socket set, Wrench set
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut came off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More