Models
>
PB20H46YT
PB20H46YT (2008-03) Poulan Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for PB20H46YT
Viewing 10 of 10_WW_1.gif "Chassis Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_2.gif "Decals Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_3.gif "Drive Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_4.gif "Electrical Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_5.gif "Engine Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_6.gif "Mower_Deck Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_7.gif "Mower_Lift Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_8.gif "Seat_Assembly Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_9.gif "Steering_Assembly Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
_WW_10.gif "Wheels_And_Tires Diagram and Parts List for 2008-03 Poulan Lawn Tractor")
Keep searches simple, eg. "belt" or "pump".
$3.99
This part is the replacement washer head screw for your lawn tractor. It is black in color and is approximately an inch and a half in length. This self-threading screw is most commonly used for securi...
In Stock
In Stock
$6.21
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually...
In Stock
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part...
In Stock
This is a flat metal washer found in various models of lawn mowers and is sold individually. This flat washer can have various functions depending on the equipment; however, its general purpose is to ...
In Stock
$23.87
This is a manufacturer-approved high quality replacement blade for a lawn tractor and is sold individually. It is used on 46-inch decks, and measures approximately 22-1/2 inches long and 2-3/4 inches ...
In Stock
$8.71
This manufacturer-approved bolt and washer assembly is for lawn tractors.
Wear work gloves to protect your hands when installing this part.
In Stock
$3.99
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
$11.20
This is a single mandrel ball bearing for a mower. It is sold individually, however it is a good idea to have a couple of these on hand. This bearing is located on top of the shaft, which is part of t...
In Stock
In Stock
$11.20
This mandrel pulley is for lawn tractors.
Mandrel pulley spins the blade on the mower deck of the tractor.
Wear work gloves to protect your hands when installing this part.
In Stock
$46.41
This is an OEM part sourced directly from the manufacturer. The belt is designed for use in Craftsman lawn tractors and riding mowers. This part is made of flexible rubber, and is used in conjunction ...
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for PB20H46YT
Viewing 2 of 2Drive system does not work
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from PILESGROVE, NJ
- Parts Used:
- 532123583
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Steven from Hickory, NC
- Parts Used:
- 532177968
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set, Wrench set
Lound deck noise when mower put into motion
Parked mower on level concrete drive, laid on cardboard. Lowered mower deck all the way. Sparayed some WD40 on nut/bolt on top of old pulley. Since it is a carriage type bolt, placed 5/8" boxed end wrench over self locking nut on top of old pulley. Using some force from 3lb mallet to break nut free (hitting against wrench body), the nut c
... Read more
ame off easy as did broken pulley/bearing inside. Installed new pulley assembly, re-tightened nut on bolt. Checked after first mowing just to be certain pulley was in place and locking nut tight.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from BINGHAMTON, NY
- Parts Used:
- 532121749
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Front wheels, too much end play
Shimmed the wheels out on axle.. No more slop.
Was this instruction helpful to you?
Thank you for voting!