Models
>
WP145H42E
WP145H42E (1998) Husqvarna Lawn Tractor
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for WP145H42E
Viewing 11 of 11_WW_1.gif "Page A Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_2.gif "Page B Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_3.gif "Page C Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_4.gif "Page D Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_5.gif "Page E Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_6.gif "Page F Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_7.gif "Page G Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_8.gif "Page H Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_9.gif "Page I Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_10.gif "Page J Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
_WW_11.gif "Page K Diagram and Parts List for 1998 Husqvarna Lawn Tractor")
Keep searches simple, eg. "belt" or "pump".
$6.21
This is a premium-quality OEM front wheel flange bearing (sometimes called bushing) commonly used in riding lawn mowers. They are used to keep the wheel held in place securely. It is sold individually...
In Stock
This manufacturer-approved ring clip is found in various lawn and garden equipment models. A ring clip is used as a fastener that secures components or assemblies onto a shaft or housing (such as part...
In Stock
$4.99
This is a genuine hex flange locknut for a lawn mower. It attaches to the carriage bolt (sold separately), fastening the axle assembly braces in place. This part is sold individually, however most mod...
In Stock
$3.99
This is an OEM lawn mower deck mandrel spacer washer, sold individually. It measures approximately 43/64-Inches in diameter, 1-1/8-Inches outer diameter, and 5/32-Inches thick (these measurements are ...
In Stock
$11.20
This is an authentically sourced OEM mandrel pulley, designed for lawn tractors (riding mowers) with a 42-inch deck. It is sold individually. This durable metal part measures approximately 5-3/16-inch...
In Stock
In Stock
In Stock
This part includes one genuinely sourced washer for a ride-on lawn mower. Washers help to disperse the load and provides a tight seal in between components. Depending on your unit, the applications wi...
In Stock
$4.99
This is a single OEM replacement screw for a lawn mower. This flanged hex head screw measures 1/4-20 by 5/8. It is used in various applications, so we recommend checking the diagram related to your mo...
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Gary from PILESGROVE, NJ
- Parts Used:
- 532123583
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Take the wheel off. Place the key in the slot. Put the wheel back on.
Just described it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from CEDAR SPRINGS, MI
- Parts Used:
- 532171888
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench set
The tie rod on my 20 year-old lawn tractor snapped.
I used two wrenches, unscrewed both ends of the old tie rod and it fell out. In nearly no time, I had the new one in. After finding the right end wrenches, I don't think I had more than 10 minutes into the project. Easiest repair I have done on anything in a long time!
Was this instruction helpful to you?
Thank you for voting!