Models
>
11A-B0BL729
11A-B0BL729 ((2015)) Yard Machines Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Keep searches simple, eg. "belt" or "pump".
This is an authentic 51-inch control cable for walk-behind lawn mowers. This part is made up of a metal wire cable with a Z-type bent end on either side, and a 37.5-inch rubberized outer cover. When t...
No Longer Available
$5.84
This is a bell blade support, also known as a bell spacer, for your lawn mower. It is fitted between the bottom of the blade, and the blade bolt. This part provides support for the blade. It is made o...
In Stock
Order within the next 3 hrs and your part ships today!
This is a flange lock nut, and it is used with various outdoor tools and equipment. The flange lock nut is all one piece. It has a bottom circular flange and a smaller top hex section. This is a torqu...
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
In Stock
Order within the next 3 hrs and your part ships today!
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Mike from NORFOLK, VA
- Parts Used:
- 787-01869B-0638
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers, Socket set
Motor built by Honda ran perfectly...deck was totally rusted and rotten
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u
... Read more
ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tim from SPOKANE VLY, WA
- Parts Used:
- 611-04144B
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Broken adjustment lever
Placed on stands to hold mower up, then removed wheels and clips, then placed new axle in place and replaced clips and wheels.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from NIXA, MO
- Parts Used:
- 720-05066A
- Difficulty Level:
- Very Difficult
- Total Repair Time:
- More than 2 hours
Lost wing knob and nut that holds the handle onto the mower
Can't do the repair. You sent me the two wing knobs I ordered, but no nuts. No one sells the nuts. I've driven all over trying to find them. Wasted my money and a lot of time. Zip ties are holding the handle on. I sent an email to customer service asking for the nuts, never heard a word from anyone. Another great example of how no
... Read more
t to run a business.
Read less
Was this instruction helpful to you?
Thank you for voting!