Models
>
65022
65022 (ES 96143002302 -2008-04) Husqvarna Lawn Mower
Jump to:
Find Part by Name
Keep searches simple, eg. "belt" or "pump".
Diagrams for 65022
Viewing 2 of 2_(2008-04)_WW_1.gif "Page A Diagram and Parts List for ES 96143002302 -2008-04 Husqvarna Lawn Mower")
_(2008-04)_WW_2.gif "Page B Diagram and Parts List for ES 96143002302 -2008-04 Husqvarna Lawn Mower")
Keep searches simple, eg. "belt" or "pump".
$34.86
Wheel 532401274 attaches to each side of the mower deck and propels the lawn mower.
A wrench is required for replacement of this part.
In Stock
$3.99
This is an OEM part sourced directly from Husqvarna. This handle knob is used on a variety of lawn and garden equipment. Commonly used in lawn mower to secure the handle, and in snow blowers to secure...
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
In Stock
Questions and Answers
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Common Problems and Symptoms for 65022
Viewing 1 of 1
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Russ from ALTENBURG, MO
- Parts Used:
- 532401274
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
My self-propelled lawnmower did not function. The front wheel assist did not work.
I removed one of the wheels and noticed that the gear teeth were worn off. I then checked the other wheel and it was the same. I ordered two replacement wheels and replaced the worn wheels with the new wheels. It took less than 15 minutes to remove the old wheels and replace with the new wheels. It took a ratchet and a 9/16 inch socke
... Read more
t. It was a very easy repair.
Read less
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from AUSTIN, TX
- Parts Used:
- 532194653
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Drive cable broken
Remove the front drive cover and disconnect the old from the drive, hook the new drive cable to the drive, and connect new cable back to the handle. Reinstalled the drive cover, started unit, and test that the drive was working correctly.
Was this instruction helpful to you?
Thank you for voting!