Models > KBDS250X4 > Instructions

KBDS250X4 KitchenAid Food Waste Disposer - Instructions

Jump to:

All Instructions for the KBDS250X4
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Richard from Freeport, ME
Parts Used:
4211344
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers, Wrench set
Leak around discharge pipe
Was amazed the gasket was delivered the day after I ordered it! Removed old gasket and cleaned out what I thought was accumulated waste. Replaced gasket and ran water, had a flood. What I had removed was rusted part of appliance. Unable to repair and ended up replacing the garbage disposal. Bad Luck.
11 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alvaro from Norwalk, CT
Parts Used:
8174292
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver
Switch was clogged with food
I need to put rubber washer and internal nut to retain the switch in place and the cover switch doesn't retain the screw ( this was passing through without retain the cover )
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
George E. from Marysville, WA
Parts Used:
4211355
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
worn out gasket
installed new gasket by hand.
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KBDS250X4
1 - 3 of 3