Models > GFB1050G03

GFB1050G03 General Electric Food Waste Disposer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for GFB1050G03

Viewing 1 of 1
Section Diagram and Parts List for General Electric Food Waste Disposer
Section
Keep searches simple, eg. "belt" or "pump".
Sink Flange – Part Number: WC15X20161
$37.78
The cushion mount forms a watertight seal between the garbage disposal neck and the mounting ring. It is made of black plastic and measures approximately 4.5 inches in diameter and is 0.125 inches thi...
In Stock
Flange Gasket - Fiber – Part Number: WC03X10008
$17.27
Sold individually.
In Stock
BATCH FEED DISPOSER STOPPER ASM – Part Number: WC11X20162
$14.25
In Stock
SUPPORT RING – Part Number: WC05X10002
$9.48
In Stock
DISPOSER DRAIN ELBOW KIT – Part Number: WC14X20160
$17.27
Special Order
Screw Package - 12 – Part Number: WZ2X45D
$18.54
In Stock
BRUSH MOTOR – Part Number: WC2X367
No Longer Available
TURNTABL Assembly – Part Number: WC19X40
No Longer Available
SPR BRUSH – Part Number: WC2X368
No Longer Available
FLANGE SCREW – Part Number: WC1X211
$6.21
Special Order
WASHER – Part Number: WC1X228
No Longer Available
DISCONTINUED – Part Number: WC24X205
No Longer Available
Back to Top
View More

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for GFB1050G03

Viewing 1 of 1
Leaking
Fixed by these parts
Fixing Fixing
How to fix it
Back to Top
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Donald from Tampa, FL
  • Parts Used:
    WC15X20161, WC03X10008
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Screw drivers
Leaky GE Disposall
Mount Ring was very difficult to remove. Hammer needed to unlock. Once removed, rubber and fiber gaskets were easily replaced. Cushion Mount did not attach properly to sink flange after many attempts, so Mount Ring was placed too high for hopper to attach. The cushion mount was finally placed on flange correctly (not sure why it attached incorrectly previously) but all is well with no leaks. Dishwasher hose needed to be re-attached after hopper mounted and locked in position.
10 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top
View More