Models > DV45H7000EW

DV45H7000EW ((A2-00)) Samsung Dryer

Jump to:

Find Part by Name

Keep searches simple, eg. "belt" or "pump".

Diagrams for DV45H7000EW

Viewing 6 of 6
Control Panel
Drum
Duct Heater-Electric
Frame Front And Door
Main Assembly
Motor Duct
Keep searches simple, eg. "belt" or "pump".
Drive Belt – Part Number: 6602-001655
$43.35
In Stock
Thermistor – Part Number: DC32-00007A
$28.69
In Stock
Idler Pulley Assembly – Part Number: DC93-00634A
$60.53
In Stock
Heating Element - 5300W – Part Number: DC47-00019A
$147.90
Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...
In Stock
Thermal Fuse – Part Number: DC47-00016A
$24.42
In Stock
Assembly DUCT HEATER;27-DRYE – Part Number: DC97-14486A
$191.17
In Stock
Assembly bracket thermostat – Part Number: DC96-00887C
$41.12
In Stock
Retainer Clip – Part Number: DC61-01228A
$3.61
In Stock
Dryer Leveling Leg – Part Number: DC61-03128A
$13.17
Leveling leg supports the dryer. Adjust the height of the leveling leg to make the dryer level.
In Stock
Door Switch – Part Number: DC64-00828B
$40.40
In Stock
SPRING ETC-TENSION;MDE97 – Part Number: DC61-01215B
$11.83
In Stock
Drive Motor – Part Number: DC31-00055G
$240.70
In Stock
Back to Top View More
Questions and Answers

Questions and Answers

Be the first to ask our experts a question about this part!

Back to Top

Common Problems and Symptoms for DV45H7000EW

Viewing 5 of 5
No heat or not enough heat
Fixed by these parts
How to fix it
Will Not Start
Fixed by these parts
How to fix it
Will not tumble
Fixed by these parts
How to fix it
Noisy
Fixed by these parts
How to fix it
Shuts off too soon
Fixed by these parts
How to fix it
Back to Top
Replacing the Drive Belt play video

Replacing the Drive Belt

Replacing the Idler Pulley Assembly play video

Replacing the Idler Pulley Assembly

Replacing the Thermistor play video

Replacing the Thermistor

Replacing the Thermal Fuse play video

Replacing the Thermal Fuse

Replacing the Assembly DUCT HEATER;27-DRYE play video

Replacing the Assembly DUCT HEATER;27-DRYE

Replacing the Dryer Leveling Leg play video

Replacing the Dryer Leveling Leg

Replacing the SPRING ETC-TENSION;MDE97 play video

Replacing the SPRING ETC-TENSION;MDE97

Back to Top View More
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
  • Customer:
    Christopher from SUGARLOAF, CA
  • Parts Used:
    6602-001655
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
The dryer turned on but the drum did not move when you pressed start even though It started it cycles.
I YouTube it and there’s a step by step process on how to do it, took maybe 30 mins. If I can so can you
19 of 30 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Noah from OXFORD, KS
  • Parts Used:
    DC93-00634A
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
  • Tools:
    Screw drivers
Tension/Dead Man Wheel Broke/Shattered
Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove old one, one screw to install new one...tentioned the belt. Dryer was good as new.
10 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
  • Customer:
    Vicky from BLOOMSBURY, NJ
  • Parts Used:
    DC93-00634A, DC61-01228A
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    30 - 60 mins
  • Tools:
    Screw drivers
Belt fell off because of belt roller on the tensioner melted, ciezed and fell off
Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!
8 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Back to Top View More