Models > DV42H5000EW

DV42H5000EW ((A3-02)) Samsung Dryer

Jump to:

Find Part by Name

Diagrams for DV42H5000EW

Viewing 6 of 6

Most Popular Parts for DV42H5000EW

Viewing 12 of 72

Screw

$20.58

This is a screw and it is made for multiple appliances in your home. This model is called a sheet metal screw because it has sharp points, and the threads are closer together. This screw is designed t...

Thermistor

$28.69

Idler Pulley Assembly

$60.53

Heating Element - 5300W

$147.90

Includes the insulators and restring already attached. This dryer heating element produces heat to dry clothes in a dryer and is located in the rear end. If the heater element is burned, dryer does no...

Thermal Fuse

$24.42

Drum Support Roller & Axle

$40.38

Sold individually.

Assembly DUCT HEATER;27-DRYE

★★★★★

(1)

$191.17

High Limit Thermostat - L260-50F

$35.78

Moisture Sensor

$13.36

Assembly bracket thermostat

$41.12

Retainer Clip

$3.61

Dryer Leveling Leg

$13.17

Leveling leg supports the dryer. Adjust the height of the leveling leg to make the dryer level.

Questions and Answers

Be the first to ask our experts a question about this part!

Common Problems and Symptoms for DV42H5000EW

Viewing 5 of 5

No heat or not enough heat

Fixed by these parts

How to fix it

Noisy

Fixed by these parts

Videos for DV42H5000EW

Viewing 8 of 10

Replacing the Idler Pulley Assembly

Replacing the Drum Support Roller & Axle

Replacing the Thermistor

Replacing the Thermal Fuse

Replacing the Assembly DUCT HEATER;27-DRYE

Replacing the Dryer Leveling Leg

Replacing the SPRING ETC-TENSION;MDE97

Replacing the ASSY DRUM WRAPPER-MODULE;DV6000R,GI,-

Installation Instructions for DV42H5000EW Provided by Fix customers like you

Viewing 3 of 18

Customer:

Noah from OXFORD, KS
Parts Used:
DC93-00634A
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers

Tension/Dead Man Wheel Broke/Shattered

Dryer would not start but electronics were working.

Pulled top of dryer off; noticed the belt was loose but not broken.
Went in through the back (1 screw and removed the exhaust pipe/plate); noticed the wheel was broken and thus the belt had fallen off.

Ordered replacement wheel/arm.
One screw to remove old one, one screw to install new one...tentioned the belt. Dryer was good as new.

10 of 15 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Vicky from BLOOMSBURY, NJ
Parts Used:
DC93-00634A, DC61-01228A
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers

Belt fell off because of belt roller on the tensioner melted, ciezed and fell off

Watched a video on utube, how to repair my 16 month old steam dryer. The hardest part was laying on my belly holding the spring loaded tensioner and slipping the belt on around the blower housing. Only cost me $23. Winning!

8 of 10 people found this instruction helpful.

Was this instruction helpful to you?

Customer:

Cynthia from JOHNSTOWN, NY
Parts Used:
DC47-00019A, DC47-00016A, DC32-00007A
Difficulty Level:
Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers

Dryer wasn’t heating

Well it went really well until the dryer was put back together as it still didn’t heat. The dryer was taken apart again. This time the thermistors &fuse was tested. Alas, the new fuse was faulty. After putting the car lid fuse back on n, the dryer worked again

6 of 6 people found this instruction helpful.

Was this instruction helpful to you?